|
|
Lancer9616
New User
Sep 23, 2017, 1:41 AM
Post #1 of 8
(1585 views)
|
|
Bleeding brakes issue
|
Sign In
|
|
Greeting
I recently worked on my 2016 2.0 4cyl na Mitsubishi lancer. We wanted to do generic thinks like paint the calipers and change my rims. Upon removing the calipers we did understand that we had to bleed the brakes. Using 3 dot brake fluid we followed a basic online guide and used the two person system. My mate bled the brakes and filled up the cylinder while i pumped and held down the brake. After going through each brake twice and following the furthest away from master rule, i had no resistance when braking and during testing on the hill we were on i omly had my handbrake (im backyard not road) ive only just had the issue today. One person suspected that we did it while the car was on and that might have been the issue. The car only has <25k on it.
Any help would be greatly appreciated
Cheers
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Sep 23, 2017, 4:07 AM
Post #2 of 8
(1568 views)
|
|
Re: Bleeding brakes issue
|
Sign In
|
|
When you removed the calipers did you let the master cylinder reservoir go dry? Still sounds like you got air in the system. The vehicle does not need to be running to bleed the brake system.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Sep 23, 2017, 4:10 AM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 23, 2017, 4:08 AM
Post #3 of 8
(1564 views)
|
|
Re: Bleeding brakes issue
|
Sign In
|
|
Are you sure you put the calipers back on the same wheel they came off of?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Lancer9616
New User
Sep 23, 2017, 5:39 AM
Post #4 of 8
(1555 views)
|
|
Re: Bleeding brakes issue
|
Sign In
|
|
Yea. When we took off the caliper we let the fluid drain out. Do we need to flush/bleed the fluid more?
|
|
| |
|
|
Lancer9616
New User
Sep 23, 2017, 5:41 AM
Post #5 of 8
(1553 views)
|
|
Re: Bleeding brakes issue
|
Sign In
|
|
Im pretty sure. We kept each set of calipers separate in left and right however the painting might have mixed them up. Could that effect the brake fluid supply?
Thanks
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 23, 2017, 10:24 AM
Post #6 of 8
(1532 views)
|
|
Re: Bleeding brakes issue
|
Sign In
|
|
Look at the calipers and see if the bleeder is above or below the brake line.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Lancer9616
New User
Sep 23, 2017, 7:46 PM
Post #7 of 8
(1525 views)
|
|
Re: Bleeding brakes issue
|
Sign In
|
|
Below or above the brake line., does it need to be?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 23, 2017, 7:57 PM
Post #8 of 8
(1521 views)
|
|
Re: Bleeding brakes issue
|
Sign In
|
|
Which is it?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
