|
|
Larry T
User
Mar 25, 2012, 2:27 PM
Post #1 of 11
(2948 views)
|
I have a 2006 Nissan Pathfinder. The Front Brake pads have 8mm lining left and the rear have 6 mm. What I need to know is what the original new thickness was. In other words how long before they need to be replaced?
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Mar 25, 2012, 2:38 PM
Post #2 of 11
(2939 views)
|
Front:
Standard thickness (new) 10.0 mm (0.394 inch)
Repair limit thickness 2.0 mm (0.079 inch)
Rear:
Standard thickness (new) 11.0 mm (0.433 inch)
Repair limit thickness 2.0 mm (0.079 inch)
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Mar 25, 2012, 2:39 PM)
|
|
| |
|
|
Larry T
User
Mar 25, 2012, 2:42 PM
Post #3 of 11
(2934 views)
|
Thanks!
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Mar 25, 2012, 2:46 PM
Post #4 of 11
(2929 views)
|
Your welcome!
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Mar 25, 2012, 2:50 PM
Post #5 of 11
(2924 views)
|
Just want to add that when even still legal when they get thin the feel isn't as good and can be subject to surprise failure. My suggestion is to be a bit early with this stuff and think the techs here would agree with that,
T
|
|
| |
|
|
Larry T
User
Mar 25, 2012, 2:54 PM
Post #6 of 11
(2915 views)
|
The Pathfinder has 53000 miles on it. At this rate, it would seem that I should start to look at replacement at about 90,000. Would you agree?
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Mar 25, 2012, 3:08 PM
Post #7 of 11
(2906 views)
|
You have to inspect them no matter what as the type of use they get will be the factor on lining life not just miles alone. If all checks and it's time it's a good time to rotate tires while doing this,
T
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Mar 25, 2012, 3:19 PM
Post #8 of 11
(2896 views)
|
90,000 miles would be ideal, but you would have to factor in things like if you get a sticking caliper or slide pin or a brake hose turns into a check valve. Lots of variables to consider on pad life. Always a good idea to check your brake after an oil change or tire rotation as Tom suggested to be sure they are happy.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Mar 25, 2012, 3:41 PM
Post #9 of 11
(2886 views)
|
One more to add: If when inspecting them both sides of an axle should look and be worn the same. It's a strong clue if one worn more than other side that a real problem is happening. No games with brakes. As a tech here once said, "Going is optional but stopping is not!"
T
|
|
| |
|
|
Larry T
User
Mar 26, 2012, 1:26 PM
Post #10 of 11
(2852 views)
|
Thanks. I agree that inspection is the only true measure. I always have them inspected when changing oil. I was just trying to get a feel for the life cycle.
Boy, (I mean wow) this is a great website! Thanks again for the advice.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Mar 26, 2012, 2:51 PM
Post #11 of 11
(2843 views)
|
Appreciate your kindness Larry T.
If unsaid this is a free site and regular techs are all volunteers but anyone can post ideas. The pay dirt is really just knowing we have helped total strangers usually with competent help/suggestions with the info at hand,
Tom
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
