Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN






Search Auto Parts

Brake master cylinder bleed


  Email This Post



Knoche
New User

Apr 25, 2022, 10:29 AM

Post #1 of 2 (1139 views)
  post locked   Brake master cylinder bleed  

2010 f150 XLT 4WD 5.4L
Can you successfully bleed the brake master cylinder the following way without damaging anything? Will this technique work to bleed the master cylinder? Attach a clear flexible hose to the left front wheel bleeder valve. Put the other end in the bottom of the brake fluid reservoir. Open bleeder valve. Pump brakes until all air is out of line, adding fluid as needed. Close bleeder valve. Remove hose. Would I need to bleed all the brake lines?


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Apr 25, 2022, 1:31 PM

Post #2 of 2 (1135 views)
  post locked   Re: Brake master cylinder bleed  

No, that is not the proper way to bleed. If it's just the master cyl and you didn't disturb the rest of the system you should be able to bleed the master right at the fittings.

If you do end up having air in the rest of the system, then you have to bleed the normal way and let the fluid go. You DO NOT want to introduce dirty fluid from to wheel back into the reservoir.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.







  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap