Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Dragging noise after replacing brake rotors


Search for (search options)
 



BNHX
New User

Nov 23, 2019, 2:34 PM

Post #1 of 4 (2598 views)
Dragging noise after replacing brake rotors Sign In

1997 Hyundai Tiburon Base Model (1.8) -- 105000 Miles

Replaced brake rotors as a fun project in this car. Had assistance and help throughout.

Once the rotors and brake pads were replaced there seemed to be a dragging noise. (Similar on both sides) I have cleaned parts and replaced the brake hardware in hopes this noise would disappear. I am somewhat new at understanding how all these parts and pieces work.

Do new rotors and pads have to be worn in?
How would I know if the rotor is warped?
Is there supposed to be visual clearance between rotor and pads while the brakes aren't activated?

The noise only occurs when brake pads are in place. Any ideas or obvious things I'm missing? Thanks!


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Nov 23, 2019, 2:54 PM

Post #2 of 4 (2596 views)
Re: Dragging noise after replacing brake rotors Sign In

Seriously............ if you have to ask questions like that you really shouldn't be repairing brakes.

Check to see if the backing plate is making contact with the rotor.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



BNHX
New User

Nov 24, 2019, 4:28 PM

Post #3 of 4 (2560 views)
Re: Dragging noise after replacing brake rotors Sign In

First thing I checked. Just wanted to see if there was anything obvious I was forgetting. Seems I’m doing okay so far. If you have anything helpful I’d love to hear it.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Nov 24, 2019, 4:46 PM

Post #4 of 4 (2556 views)
Re: Dragging noise after replacing brake rotors Sign In

Well, if it wasn't the backing plates then something was installed incorrectly so I guess you aren't doing OK.
I reread your question. Did you replace the rotors and not the pads. That would explain a lot.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.







 
 
 






Search for (options) Privacy Sitemap