|
|
Cluncking noise driver side suspention
|
|
|
| |
|
locko
New User
Oct 19, 2010, 1:39 PM
Post #1 of 5
(2209 views)
|
Cluncking noise driver side suspention
|
Sign In
|
|
I have a problem identifying the correct part for a Voyager. The car presents with a clunk/ knocking noise just below the driver peddles, i have accessed 2 different mechanics who have replaces the drop links and the Top Mount Strut at great expense considering the noise remains. The latest mechanic believes that it must be the Lower arm wishbone; however I’m reluctant to explore this as this again may not repair the problem. Could anyone advise, if experienced this before? Regards Chrysler Voyager 2.5 CRD 2003 70,000k
|
|
| |
|
Sidom
Veteran
/ Moderator
Oct 19, 2010, 2:12 PM
Post #2 of 5
(2204 views)
|
Re: Cluncking noise driver side suspention
|
Sign In
|
|
I would suggest unbolting the links to the struts and drive the van for a short distance. If the noise is gone more than likely you have bad sway bar frame bushing (even if they look good) than need to be replaced and then the links reattached...
(This post was edited by Sidom on Oct 19, 2010, 2:13 PM)
|
|
| |
|
ramit98
New User
Jan 17, 2011, 6:54 PM
Post #3 of 5
(2096 views)
|
Re: Cluncking noise driver side suspention
|
Sign In
|
|
i have an 07 caravan doing the same thing when i stop then go it clunks dealers changed sway bar link and bushings , tie rod end all inner and outter , strut bearings , steering rack , left axle , even did a brake servise ...., its driving me nuts!! have you found the issue on your 03?
|
|
| |
|
locko
New User
Feb 10, 2011, 2:32 PM
Post #4 of 5
(2061 views)
|
Re: Cluncking noise driver side suspention
|
Sign In
|
|
Nope! The mechanics’ have not got a Scooby Doo. I'll just have to wait for the clunk to get louder... Crazy!
|
|
| |
|
autojoe
User
Feb 25, 2011, 4:19 PM
Post #5 of 5
(2012 views)
|
Re: Cluncking noise driver side suspention
|
Sign In
|
|
I use a steelman wireless chassis ear for all my under car noises.works like a charm.has not failed me yet.one of the best peices of equipment that I have.You put clips on different areas components and can switch channels to isolate noise and pinpoint location.
|
|
| |
|