|
|
cheyne333
Novice
Feb 27, 2008, 3:44 PM
Post #1 of 2
(1934 views)
|
So say i were to buy this:
http://www.circuitcity.com/ssm/Bazooka-Dual-10-Subs-300W-Amp-and-Enclosure-Package-EL10190PP/sem/rpsm/oid/150746/catOid/-13093/rpem/ccd/productDetail.do
What else would i need to buy in order to hook this up?
|
|
| |
|
|
tusseltussel
User
Feb 28, 2008, 4:05 PM
Post #2 of 2
(1926 views)
|
you gonna use the stock head unit and speakers with it. its much easier to hook up to a aftermarket head unit than all you need is the adapter to plug it in to your existing wire harness a set if audio cables to go from the new head unit to the amp some thick gage wires for power with a inline fuse and ground and a 12\14 gage wire to run from the anps remote terminal to the electric antenna wire on your harness or to the power wire that only has power when the key is on. and the face plate adapter for your fancy new head unit if your anywhere near northwest Tn. I have a 1000 watt phoenix gold amp and 2 12" eclipse subs and all the wires you need to hook it all up if you really wanna shake the body rivets outa your car but then again i may put that in my bus
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 