|
|
|
1998 honda crv 2.0 no spark
|
|
|
| |
|
|
Maurer78
New User
Apr 12, 2016, 5:33 PM
Post #1 of 6
(3386 views)
|
|
1998 honda crv 2.0 no spark
|
Sign In
|
|
My 1998 honda crv is getting no spark to the distributor at all would run fine all day but once it sat all night would take a while to start back again and now does not start at all
I have replaced the following parts
Brand new distributor
Main relay
Under dash fuse box
Under hood fuse box
Ingition switch
Ecu
Not sure what else to do really need some help on this
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 12, 2016, 5:38 PM
Post #2 of 6
(3384 views)
|
|
Re: 1998 honda crv 2.0 no spark
|
Sign In
|
|
You need to do some more test here................
All "crank, no start" conditions are approached in the same way. Every engine requires certain functions to be able to run. Some of these functions rely on specific components to work and some components are part of more than one function so it is important to see the whole picture to be able to conclude anything about what may have failed. Also, these functions can ONLY be tested during the failure. Any other time and they will simply test good because the problem isn't present at the moment.
If you approach this in any other way, you are merely guessing and that only serves to replace unnecessary parts and wastes money.
Every engine requires spark, fuel and compression to run. That's what we have to look for.
These are the basics that need to be tested and will give us the info required to isolate a cause.
1) Test for spark at the plug end of the wire using a spark tester. If none found, check for power supply on the + terminal of the coil with the key on.
2) Test for injector pulse using a small bulb called a noid light. If none found, check for power supply at one side of the injector with the key on.
3) Use a fuel pressure gauge to test for correct fuel pressure, also noticing if the pressure holds when key is shut off.
4) If all of these things check good, then you would need to do a complete compression test.
Once you have determined which of these functions has dropped out,
you will know which system is having the problem.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Apr 12, 2016, 5:47 PM
Post #3 of 6
(3381 views)
|
|
Re: 1998 honda crv 2.0 no spark
|
Sign In
|
|
Also if there are any trouble codes stored in the engine controller, write them down.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
Maurer78
New User
Apr 12, 2016, 7:21 PM
Post #4 of 6
(3374 views)
|
|
Re: 1998 honda crv 2.0 no spark
|
Sign In
|
|
P1298 /p1297
Only thing im not getting is spark replaced everything
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Apr 13, 2016, 4:25 AM
Post #6 of 6
(3354 views)
|
|
Re: 1998 honda crv 2.0 no spark
|
Sign In
|
|
While your checking for those thing, remove the distributor cap and crank the engine. Maybe sure the distributor's rotor spins.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
