|
|
jw6397
Novice
Mar 21, 2010, 2:44 PM
Post #1 of 8
(6159 views)
|
|
96 Geo Prizm, wont start
|
Sign In
|
|
I just bought a 96 Geo Prizm, someone had replaced the engine and it wont start, I noticed when I put a fresh battery in, the daytime running lights came on without the keys in the ignition. It turns over, but wont run, and lights stay on at all times.
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Mar 21, 2010, 4:24 PM
Post #2 of 8
(6133 views)
|
|
Re: 96 Geo Prizm, wont start
|
Sign In
|
|
Pull the DRL relay and see if it has power to the control terminal. If not, the relay is sticking and replacing it will cure the trouble.
|
|
| |
|
|
jw6397
Novice
Mar 21, 2010, 4:49 PM
Post #3 of 8
(6132 views)
|
|
Re: 96 Geo Prizm, wont start
|
Sign In
|
|
Will that stop it from starting though Nick?
Jim
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Mar 21, 2010, 6:19 PM
Post #4 of 8
(6120 views)
|
|
Re: 96 Geo Prizm, wont start
|
Sign In
|
|
No. The DRL circuits have nothing to do with your engine running. They are a key-on accessory. Have you ever heard this car run on the new engine or did you buy it like this? You are either missing fuel, spark, or both. Check fuel pressure at the rail and check for spark while cranking. Post back with results. Also, look very closely for anything that might not have been hooked up by the last guy working on it if you bought it non-running. Pull some spark plugs and check to see the condition. Might be something cheap and easy that will get this on the road for you. Check the little things first and find out if you have fuel and spark. Post back with what you have and we can guide you to the next step from there. If your engine light is on get the codes and post them too. The more information we have the more we can do for you here.
|
|
| |
|
|
jw6397
Novice
Mar 29, 2010, 5:29 PM
Post #5 of 8
(6088 views)
|
|
Re: 96 Geo Prizm, wont start
|
Sign In
|
|
I pulled the DRL relay behind the headlight, that stopped the lights from being on constantly. Checked all the spark plug wires with a timing light while I was turning it over....no light, appears to be no spark, is there a sequence of things I should go through for the ignition system Nick?
Jim
|
|
| |
|
|
jw6397
Novice
Apr 11, 2010, 1:23 PM
Post #6 of 8
(6058 views)
|
|
Re: 96 Geo Prizm, wont start
|
Sign In
|
|
The check engine light comes on without the key being in the ignition and the temperature gauge cranks, when I turn the key to ON, the temp gauge goes back down?
|
|
| |
|
|
jw6397
Novice
Apr 25, 2010, 1:18 PM
Post #7 of 8
(6028 views)
|
|
Re: 96 Geo Prizm, wont start
|
Sign In
|
|
The check engine light comes on without the key being in the ignition
and the temperature gauge cranks, when I turn the key to ON, the temp
gauge goes back down?
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Apr 25, 2010, 4:05 PM
Post #8 of 8
(6022 views)
|
|
Re: 96 Geo Prizm, wont start
|
Sign In
|
|
this sounds like an ignition switch as its affecting key on circuits while off.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
