|
|
papoh3
User
Nov 21, 2012, 3:51 PM
Post #1 of 19
(2278 views)
|
"Backup Lights"
|
|
|
Hi folks,
I have a 1989 mazda 323 Base hatchback sohc--1.6L 5spd. manual: My situation is this: My backup lights do not lite up. I've check fuses they-r- ok. for what i can assume is that iam not getting power to the bulb sockets, but i do not know where to begin surching or testing.
Any help will be appreciated--thank you in advance.
Papoh3====
(This post was edited by papoh3 on Nov 21, 2012, 4:38 PM)
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 21, 2012, 4:17 PM
Post #2 of 19
(2268 views)
|
|
Re: "Backup Lights"
|
|
|
Automatic or manual? You have a volt meter or 12 volt test lamp and know how to use it?
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
papoh3
User
Nov 21, 2012, 4:40 PM
Post #3 of 19
(2243 views)
|
|
Re: "Backup Lights"
|
|
|
I'am sory--It is a 5spd. manual. To answer your post, I do have both instruments and not too sure about using them.
Thanks.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 21, 2012, 5:05 PM
Post #5 of 19
(2241 views)
|
|
Re: "Backup Lights"
|
|
|
You really need to find someone that knows how to use them. They will help make finding your problem a whole lot easier.
One thing you can do is check the reverse switch. It is screwed into the transmission and has two wires red/white and black/yellow. You really need to see if you have power to the black/yellow wire at the switch connector. If you do, you can jump the harness terminals together to see if the reverse light come on. If they do, more than likely there is either a problem with the switch itself or the component in the transmission that pushes on the switch.
Reverse switch:
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Nov 21, 2012, 5:06 PM)
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 22, 2012, 3:55 PM
Post #7 of 19
(2193 views)
|
|
Re: "Backup Lights"
|
|
|
Number 14
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Nov 22, 2012, 4:01 PM)
|
|
| |
|
|
papoh3
User
Nov 22, 2012, 4:36 PM
Post #8 of 19
(2187 views)
|
|
Re: "Backup Lights"
|
|
|
Thank you Descrete--for your help. I still need to find a way to test whatever i need to test to find the problem as to why the lights are not working. The switch a bought from a yunk yard, maybe that switch is bad-who knows?.
Happy Thanksgiving................
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 22, 2012, 4:58 PM
Post #9 of 19
(2179 views)
|
|
Re: "Backup Lights"
|
|
|
Happy Thanksgiving to you and your family also 
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Nov 22, 2012, 4:59 PM)
|
|
| |
|
|
mr+brakes
User
Dec 10, 2012, 10:25 PM
Post #10 of 19
(2074 views)
|
|
Re: "Backup Lights"
|
|
|
Replace the light bulbs. Sometimes light bulbs loose connectivity to light up. or bulbs burn out. I have seen bulbs look good but turned out no good.
|
|
| |
|
|
papoh3
User
Dec 21, 2012, 6:40 PM
Post #11 of 19
(2023 views)
|
|
Re: "Backup Lights"
|
|
|
Thanks Discretesignals:
I found the problem--The switch harness has been cut right at the switch. I got a new switch, but I have a bigger delema, There are no plugs in the engine compartment to match the plug that comes from the switch. Any ideas on that issue. I really appreciate all your help on this, any way we can fix the new problem?...
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Dec 21, 2012, 6:56 PM
Post #12 of 19
(2019 views)
|
|
Re: "Backup Lights"
|
|
|
Do you mean the connector at the switch itself? If the wiring is cut at the end of the connector, you might be able to take the connector apart and remove the terminals. Then you might be able to solder the wire to the remaining piece that is still attached to the terminal.
edit:
I reread that a couple of times. Do you mean the new switch's connector doesn't plug into the vehicle harness connector?
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Dec 21, 2012, 7:03 PM)
|
|
| |
|
|
papoh3
User
Dec 23, 2012, 2:53 PM
Post #13 of 19
(1997 views)
|
|
Re: "Backup Lights"
|
|
|
Hi--Yes the new switch's connector can not be plug into the vehicle harness connector, because there is no connector that matches the switch connector. If that makes any sense!
Thanks...
(This post was edited by papoh3 on Dec 23, 2012, 3:32 PM)
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Dec 23, 2012, 5:31 PM
Post #14 of 19
(1986 views)
|
|
Re: "Backup Lights"
|
|
|
Does the connector look like the one in the picture?
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
papoh3
User
Dec 23, 2012, 6:39 PM
Post #15 of 19
(1973 views)
|
|
Re: "Backup Lights"
|
|
|
Yes it does, identical. If you notice the plug on the switch. on the vehicle harness there are no plugs that look like that..
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Dec 23, 2012, 6:42 PM
Post #16 of 19
(1972 views)
|
|
Re: "Backup Lights"
|
|
|
The old switch was plugged into the vehicle harness?
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
papoh3
User
Dec 24, 2012, 4:24 PM
Post #17 of 19
(1948 views)
|
|
Re: "Backup Lights"
|
|
|
I don't know if it was, or not. Iam sure at one time it had to be--if it was where in the world did they plug the switch to???
(This post was edited by papoh3 on Dec 24, 2012, 9:20 PM)
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Dec 25, 2012, 7:12 AM
Post #19 of 19
(1929 views)
|
|
Re: "Backup Lights"
|
|
|
Glad to see you finally got that resolved. Thanks for the follow up because someday this may help someone else out. Happy Holidays to you and your family. 
Closed as solved.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
