|
|
|
DEAD power windows 2000 olds silouette
|
|
|
| |
|
|
harveydriver
User
Dec 4, 2009, 12:50 PM
Post #1 of 16
(5183 views)
|
|
DEAD power windows 2000 olds silouette
|
Sign In
|
|
Year of vehicle: 2000
Make of vehicle: Olds
Model of vehicle: Silhouette
Engine size: 3.4
Mileage: 100,000
Hi there all.
I have a 2000 olds silhouette. The power windows all stopped working at the same time. They were working one minute, the next minute, they weren't. We didn't hear, see or smell anything happen. I checked for current at the door switches and at the 30 amp fuse in the fuse block located on the right side of the dash. I checked for current with the ignition switch on and there was no current. I tried taking the 30 amp fuse out and connecting 12 volts directly to that fuse receptacle via a battery charger and the windows functioned as if there wasn't enough power...they moved, but very slowly, with a electrical growling noise.
Do you all have any ideas? Thank you so much in advance!
|
|
| |
|
|
steve01832
Veteran
Dec 4, 2009, 6:35 PM
Post #2 of 16
(5174 views)
|
|
Re: DEAD power windows 2000 olds silouette
|
Sign In
|
|
Here is the wiring diagram for your Olds.
Steve
(This post was edited by steve01832 on Dec 4, 2009, 6:36 PM)
|
|
Attachments:
|
82002218.gif
(68.5 KB)
|
|
| |
|
|
harveydriver
User
Dec 4, 2009, 7:37 PM
Post #3 of 16
(5162 views)
|
|
Re: DEAD power windows 2000 olds silouette
|
Sign In
|
|
Thank you for posting the wiring diagram. I have a 1999 service manual with all of the diagrams, but they are not helping me, unfortunately. I am trying to figure out why there isn't any juice going to the 30 amp fuse (at the top of the wiring diagram). When the ignition key is turned on there should be juice to that fuse. Has anyone seen a better wiring diagram that begins from the ignition switch and goes to that 30 amp windows fuse? Does anyone know any other reason why there is no power to the windows fuse?
Thanks again!
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Dec 4, 2009, 7:49 PM
Post #4 of 16
(5153 views)
|
|
Re: DEAD power windows 2000 olds silouette
|
Sign In
|
|
That's not a fuse. It's a circuit breaker. Are you sure your testing the right spot? Do you have the key on?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
harveydriver
User
Dec 4, 2009, 8:49 PM
Post #5 of 16
(5145 views)
|
|
Re: DEAD power windows 2000 olds silouette
|
Sign In
|
|
I pulled the circuit breaker out and used a test light on either of the contacts that the circuit breaker plugs into and no juice with the key on. There are two other 30 amp breakers below that one and the test light lights on those two.
thank you again
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Dec 4, 2009, 9:09 PM
Post #6 of 16
(5140 views)
|
|
Re: DEAD power windows 2000 olds silouette
|
Sign In
|
|
That circuit breaker is powered by the RAP relay in the relay center under the hood
Diagram attached
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
Attachments:
|
window circuit breaker Silhouette.gif
(53.4 KB)
|
|
| |
|
|
harveydriver
User
Dec 4, 2009, 9:46 PM
Post #7 of 16
(5131 views)
|
|
Re: DEAD power windows 2000 olds silouette
|
Sign In
|
|
Could you tell me where (under the hood) this rap unit is located and what it looks like? How does it function? What would make this stop working and can I reset or get it to function again without buying new?
Thank you
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Dec 5, 2009, 5:45 AM
Post #8 of 16
(5125 views)
|
|
Re: DEAD power windows 2000 olds silouette
|
Sign In
|
|
There is nothing to reset. It's a relay and it's located in the relay center
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
harveydriver
User
Dec 5, 2009, 11:09 AM
Post #9 of 16
(5113 views)
|
|
Re: DEAD power windows 2000 olds silouette
|
Sign In
|
|
Hi,
Thanks again for all of your help. Are you talking about the fuse relay center? The relay is # 11 (ignition relay)? It has four prongs and when I pull it out, the car will not start. If the car runs, does that mean the relay is good, or does the relay have dual function and the part that powers the windows failed? Is that possible?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Dec 5, 2009, 11:25 AM
Post #10 of 16
(5108 views)
|
|
Re: DEAD power windows 2000 olds silouette
|
Sign In
|
|
The RAP relay stands for Retained Accessory Power relay. It's the relay that keep power to your accessories aftyer the key is shut off and before the door is opened. If your radio is working that way, then the relay is fine and your problem has to be in the wiring between them.
I can't find a good picture of the really itself but here is the wiring diagram for it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
Attachments:
|
Retained accessory diagram.gif
(60.4 KB)
|
|
| |
|
|
harveydriver
User
Dec 5, 2009, 12:26 PM
Post #11 of 16
(5097 views)
|
|
Re: DEAD power windows 2000 olds silouette
|
Sign In
|
|
My radio functions fine by shutting off when the door is opened. Then, the rap relay is good.
There is a heavy dark blue wire coming from the fuse block where the circuit breaker is. Does this wire run directly to the fuse center (underhood)? I have taken the bottom off of the fuse center and I cannot find that heavy dark blue wire there. The diagram shows the blue wire from relay to fuse block. Does it change color somewhere?
Thanks for letting me pick your brain so much!
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Dec 5, 2009, 12:30 PM
Post #12 of 16
(5091 views)
|
|
Re: DEAD power windows 2000 olds silouette
|
Sign In
|
|
I gave you the wiring diagram. It has all the color codes and connectors on it.
It shows a dark blue wire going into the circuit breaker.
I hope your looking at the right breaker.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
harveydriver
User
Dec 5, 2009, 4:19 PM
Post #13 of 16
(5081 views)
|
|
Re: DEAD power windows 2000 olds silouette
|
Sign In
|
|
I took the glove box out to follow the heavy dark blue wire from the 30 amp window circuit breaker located in the fuse box to the right of the glove box. The blue wire goes from there toward the firewall and then curves around to three relays that are on the right hand corner firewall . The relays look the same type as the ones in the fuse relay center (under the hood). Do you know what these relays are used for?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Dec 5, 2009, 8:12 PM
Post #14 of 16
(5075 views)
|
|
Re: DEAD power windows 2000 olds silouette
|
Sign In
|
|
They are the rear defogger relay and the theft deterrent relay. The third one shows empty.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
harveydriver
User
Dec 6, 2009, 9:19 PM
Post #15 of 16
(5063 views)
|
|
Re: DEAD power windows 2000 olds silouette
|
Sign In
|
|
Thanks for all of your help Hammer time! It's been real cold here and I haven't been able to fix this problem yet. As soon as I find the rap relay I intend to run a new wire from there to the 30 amp fuse in the fuse block. Troubleshooting the old line for a short looks to be more difficult.
I will post again if I need more advice or as soon as the problem gets solved.
|
|
| |
|
|
harveydriver
User
Dec 29, 2009, 12:04 PM
Post #16 of 16
(5033 views)
|
|
Re: DEAD power windows 2000 olds silouette
|
Sign In
|
|
Hi again,
Thanks again for all of your help! Sorry, it took me so long to (sort of) fix the problem. I tried to find a short between the circuit break er and the relay switch but no luck. I finally removed the relay switch and ran a jumper wire from the 12 volt power terminal direct to the window terminal where that relay plugged in to. The windows work but do not have a timed shut off they work with the ignition switch off (not a problem for me) and the compressor in the rear drivers side comes on until the pressure shuts it off (also not a problem). It seems as though the relay switch was not being activated, allowing the current to flow to the windows.
Is it possible that the drivers side window switch activates the timed relay switch when the ignition switch is turned on thereby allowing the current to flow from relay to circuit breaker and finally to the window switch? If not the window switch, what activates that timed relay?
Hope I explained myself clearly
Thank you!!
|
|
| |
|
| | |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
