|
|
|
Problem changing a light bulb :)
|
|
|
| |
|
|
Don Kondra
New User
Oct 13, 2013, 6:51 PM
Post #1 of 7
(1437 views)
|
Problem changing a light bulb :)
|
|
|
Greetings,
I recently purchased a 2008 Dodge Grand Caravan SE and it is time to change the headlight bulbs (9008/H13).
Since the majority of my night time driving is on rural gravel roads I've decided to try the Sylvania Silverstar Ultra bulbs.
The problem is the old headlight bulbs are two pieces, the bulb itself and a male end that fits into the female socket.
The new Ultra's are one piece.
It does not matter if I slide the red lock or not, the male part of the bulb assembly comes off and I can't get it out of the socket.
Of course I tried prying it out and the plastic breaks away. But, this did allow me to see that the red locking mechanism is still engaged when the red clip is pulled out.
I can use a screwdriver :) to lift up the clip but I need a third hand to pull it out.
There must be a "trick" to doing this ?
Plan B is to cut them off and install new sockets with ceramic connectors....
Cheers, Don
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Oct 13, 2013, 7:01 PM
Post #2 of 7
(1423 views)
|
|
Re: Problem changing a light bulb :)
|
|
|
They look identical to me
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Oct 13, 2013, 7:07 PM
Post #3 of 7
(1418 views)
|
|
Re: Problem changing a light bulb :)
|
|
|
Sometimes these things stick. Grab the red clip with a needlenose pliers and press in. Then depress the release tab and wiggle while you pull back. Its a pain, but doable.
Good idea on the bulbs. I put a set in for my girl and was impressed with how good the lighting is.
|
|
| |
|
|
Don Kondra
New User
Oct 13, 2013, 7:10 PM
Post #4 of 7
(1418 views)
|
|
Re: Problem changing a light bulb :)
|
|
|
They are identical.
But, the original bulb is not permanently attached to the bottom male part, it slides onto three pins.
Cheers, Don
|
|
| |
|
|
Don Kondra
New User
Oct 14, 2013, 4:17 PM
Post #6 of 7
(1399 views)
|
|
Re: Problem changing a light bulb :)
|
|
|
And the answer is....
The jaws are thin enough to slip inside the socket, the ends are rounded and easily slipped under and pushed up on the lock.
New bulbs installed and lenses polished. Bring on the night 
Cheers, Don
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Oct 14, 2013, 4:44 PM
Post #7 of 7
(1394 views)
|
|
Re: Problem changing a light bulb :)
|
|
|
Glad you got it
Question closed now as solved to keep spammers out.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
