Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
with_replies.gif image   1989 toyota pickup 3.0 crank no start
I have a 1989 toyota pickup 3.0 crank no...

with_replies.gif image   Strut spring orientation and strut mount tension nut
2017 Nissan rogue awd 2.5 L Put in Monro...

with_replies.gif image   Transmission stuck in part, I have tried everything
So I'm working on my elderly fathers 201...

with_replies.gif image   2017 dodge journey LED headlights on/off randomly
Year of vehicle 2017 Make of vehicle dod...

with_replies.gif image   Kia Soul starter replacement issues!
Okay so my car is a 2010 Kia soul 2.0 en...

hot_with_replies.gif image   Please Help - Knock sound & engine fail
Hi all, Hoping to get some insight and ...

with_replies.gif image   multiple warning lights
2013 GMC Terrain 130,000 miles 4 cylinde...

with_replies.gif image   03 alero no low speed blower
Good day everyone, I have a 2003 Olds a...

with_replies.gif image   04 Chevy 2500hd tail light issues
Help!!! I have changed my combo switch...

with_replies.gif image   1999 Grand Caravan Sport not starting.
Hi. I'm new here. I hope someone can hel...




Street Rod aftermarket headlights

Search for (search options)
 



35Ford
New User

Jul 14, 2014, 3:26 PM

Post #1 of 3 (1722 views)
Street Rod aftermarket headlights Sign In
Installed headlights with built in park/turn signal....have six wires coming from headlight unit....red (high beam) green (low beam) and black (ground) for the headlight.....red (turn), black (park) and white (ground) from the parking light unit.....4 wires coming from steering col. tan (high beam), Green (low beam), blue (turn) and brown (park). I've combined the black ground and the white ground into one wire grounded to the frame....it is a good ground. WITHOUT connecting the column wires to the headlight unit all the wires are hot when they are activated by their respective control, however, the turn signal does not work when all the connections are made.....but the headlight will act as a turn signal if I place the red or green wire from the headlight unit to the blue wire from the column. Any ideas?


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Jul 14, 2014, 8:42 PM

Post #2 of 3 (1701 views)
Re: Street Rod aftermarket headlights Sign In
Did this kit come with any instructions? Lost with a "Street Rod" as it's probably only a frame serial # and who knows what else is from what to put a standard to anything?


If replacing something that worked go by that and what had power and ground. This aftermarket kit should have come with some information if only to fuse it properly and what watts bulbs may consume for power.


Custom cars like this should have a ton a papers on what was done with what or be obvious.


Whatever you do use automotive grade wire and connections. Fuse properly and harness wires carefully,


T



Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jul 14, 2014, 10:35 PM

Post #3 of 3 (1696 views)
Re: Street Rod aftermarket headlights Sign In
Try taking another external light and wire it to each circuit individually to test the circuit. You may have one of these wires identified incorrectly. It will tell you if the circuit is good when standing alone and that may tell you if something else is interfering when attached to the mounted lights.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.






 
 
 






Search for (options) Privacy Sitemap