|
|
|
Weird I mean WEIRD electrical problem
|
|
|
| |
|
|
deep_weeds
Novice
Jun 30, 2012, 10:10 PM
Post #1 of 6
(2256 views)
|
|
Weird I mean WEIRD electrical problem
|
Sign In
|
|
So I've just finished my long block swap into the 1997 Jeep Grand Cherokee 4.0 auto. It's up and running, if a little roughly - tuneup to come.
History: Last November, after nearly 500k km, the engine blew. Then it sat until last week when I tackled the swap. So it was without battery for about six months. Also, before the motor went I'd had no electrical problems with this thing, weird or not.
Now: A bunch of seemingly-unrelated things don't work. The hazard flashers, turn signals, radio, dashboard computer, interior lights, and power seats are dead. Perhaps the oddest of these is the hazard lights, as they should work even when the key is out. Everything else works. But I made a strange discovery.
If I hold the headlight dimmer switch in (that is, pulled toward me) when the high beams are on, all of the dead things work. However, toggling the dimmer and holding the switch (again, pulled toward me in the low-beam position) makes all those things fail.
I've checked every fuse and swapped every relay possible.
Weird. Consistent, but weird.
Any hints? My first thought was the multifunction switch itself, but so many of these things (the radio and power seats, for dog's sake) have nothing to do with it. So is it the Body Control Module? I'm an EE, and this one's got me stumped.
Thanks.
Jonathan
p.s.
The reason I mention the time it's been stored is that I'm wondering
whether there's some kind of battery backup in the BCM that might have
gone dead and caused it to lose rational settings, just like a PC
losing its BIOS settings when the motherboard battery goes flat.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jun 30, 2012, 11:45 PM
Post #2 of 6
(2222 views)
|
|
Re: Weird I mean WEIRD electrical problem
|
Sign In
|
|
My first guess with an engine swap especially is you have one or more ground issues either broken, not tight or poor connections,
T
|
|
| |
|
|
deep_weeds
Novice
Jul 1, 2012, 7:40 PM
Post #3 of 6
(2177 views)
|
|
Re: Weird I mean WEIRD electrical problem
|
Sign In
|
|
Problem solved. Though I have strong resistance to believing in coincidental failures, that's what happened here.
Not a ground problem at all. One of the fused but unswitched +12 wires running from the Power Distribution box (next to the battery) to the Junction Block (down in the passenger footwell) had a nick in its insulation where it passes through the firewall. The nick let in moisture, which eventually (concluding sometime in the last six months) corroded the wire in two.
If I hadn't spent the $100 on the factory manual for this thing when I bought it seven years ago, I wouldn't have stood a hope of finding the fault.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jul 1, 2012, 10:47 PM
Post #4 of 6
(2166 views)
|
|
Re: Weird I mean WEIRD electrical problem
|
Sign In
|
|
Glad you found it. Stuff happens like that,
T
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Jul 2, 2012, 5:23 PM
Post #5 of 6
(2144 views)
|
|
Re: Weird I mean WEIRD electrical problem
|
Sign In
|
|
Smart move getting the right data and knowing how to use it. Congrats and thanks for posting the fix.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jul 2, 2012, 5:48 PM
Post #6 of 6
(2140 views)
|
|
Re: Weird I mean WEIRD electrical problem
|
Sign In
|
|
Even though this doesn't fall under your problem it goes to prove that when you punch holes in the insulation on wiring to make electrical checks or you splice circuits, you should reseal those holes and use the correct splicing methods. Seen a lot of electrical problems because someone has been there before and didn't clean up their mess.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
