Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









brake lights


Search for (search options)
 



jfairman
New User

Aug 11, 2008, 4:53 AM

Post #1 of 5 (2583 views)
brake lights Sign In

2001 GMC Jimmy: Brake lights don't work and it's not the bulbs, they have been changed, can't seem to locate the correct fuse box by use of the manual or locate the brake pedal sensor.


(This post was edited by jfairman on Aug 11, 2008, 5:09 AM)


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Aug 11, 2008, 6:50 AM

Post #2 of 5 (2574 views)
Re: brake lights Sign In

for a 2001 GMC Truck Jimmy 2WD
One is listed for this. Looks like most would - located at brake pedal lever arm up higher where it piviots,

T



jfairman
New User

Aug 11, 2008, 7:36 AM

Post #3 of 5 (2570 views)
Re: brake lights Sign In

   

Thank you, I'll check that too. Also, could it be the device that controls the four way blinker, it doesn't work either?


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Aug 11, 2008, 9:27 AM

Post #4 of 5 (2565 views)
Re: brake lights Sign In

Ok: time to check all the fuses. Owner's manual should detail which ones cover what. That or find them inside and out (prob inside for brake lights) and test with test light (circuit tester) that both side of the fuse light up and not that a fuse just looks good. That's a start needed for now and go on from there,

T

Ps: Flasher could be a problem area for this with neither brake or "four way hazzards" working.



(This post was edited by Tom Greenleaf on Aug 11, 2008, 9:29 AM)


Double J
Veteran / Moderator
Double J profile image

Aug 12, 2008, 11:05 AM

Post #5 of 5 (2553 views)
Re: brake lights Sign In

GM issued a recall on this concern.
They had a problem in the multifunction switch.

The multifunction switch may develop an open circuit condition with the bottom contact in the hazard switch carrier that results in the stop lamps and hazard lamps becoming inoperative.

Yours may be affected by the recall and the recall may not have been performed yet.
Contact your dealer with your vehicles VIN number

If not ,your probably going to need to replace either the hazard warning flasher switch or the entire Multifunction switch.


Jim






 
 
 






Search for (options) Privacy Sitemap