|
|
zeisea
Novice
Aug 27, 2010, 6:20 PM
Post #1 of 9
(1266 views)
|
i have a 97 chev lumina. the brake lights don't work. or rather, the left works itermittantly, the right not at all. the 4 ways, left/right blinkers, and tail lights all work. i have checked fuses. i have checked visible wires for breaks/shorts. what and where should i begin troubleshooting? thanks in advance for the help...
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 27, 2010, 6:33 PM
Post #2 of 9
(1261 views)
|
Does the 3rd (high mount) brake light work all the time?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
zeisea
Novice
Aug 27, 2010, 6:47 PM
Post #3 of 9
(1256 views)
|
yes it works all the time
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 27, 2010, 6:49 PM
Post #4 of 9
(1249 views)
|
You likely have a bad turn signal switch which is built into the combo switch. You really need to check the output wires for those inoperative lights right at the Combo switch to be sure.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
zeisea
Novice
Aug 27, 2010, 6:58 PM
Post #5 of 9
(1246 views)
|
ok thank you, you are the second person to suggest this. my problem is how to access the switch. take the steering wheel off? it has an airbag and i don't want to go anywhere near it. how, or can the switch be removed without removing the wheel?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 27, 2010, 7:00 PM
Post #6 of 9
(1242 views)
|
You should be able to replace that without pulling the wheel. It bolts to the side of the column. Just pull the covers off and you can see it clearly.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
zeisea
Novice
Aug 27, 2010, 7:12 PM
Post #7 of 9
(1238 views)
|
i just went and checked. there is a small plastic cover which i could remove to see the switch but i can't get at the the screws, any of them, with the wheel in place. had to turn the wheel all the way left just to shine a light in there to see.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 27, 2010, 7:18 PM
Post #8 of 9
(1233 views)
|
Yeah, I just checked and this one is the old style so yes, the wheel and column have to come apart. The newer ones bolt to the side.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
zeisea
Novice
Aug 27, 2010, 7:22 PM
Post #9 of 9
(1229 views)
|
i really appreciate you responding to my post though, thanks for getting me a step closer to a solution, even if it IS bringing it to the garage
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
