|
|
augie729
New User
Apr 15, 2011, 6:19 AM
Post #1 of 7
(1308 views)
|
|
changing ignition lock
|
Sign In
|
|
On a 2001 Pontiac gran am after replacing the ignition lock does the bcm have to be reprogrammed or just a relearn procedure or both????
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 15, 2011, 7:49 AM
Post #2 of 7
(1301 views)
|
|
Re: changing ignition lock
|
Sign In
|
|
Just the relearn but it may require the 30 minute version of it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
augie729
New User
Apr 15, 2011, 8:12 AM
Post #3 of 7
(1291 views)
|
|
Re: changing ignition lock
|
Sign In
|
|
oh ok I thought the bcm how to be cleared of codes this is why i ask? since the securty light comes on every now and than stays on steady does not blink
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 15, 2011, 8:14 AM
Post #4 of 7
(1287 views)
|
|
Re: changing ignition lock
|
Sign In
|
|
That means you have another problem in the system somewhere that the ignition didn't resolve.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
augie729
New User
Apr 15, 2011, 8:58 AM
Post #5 of 7
(1281 views)
|
|
Re: changing ignition lock
|
Sign In
|
|
well I did not replace the ignition lock yet but there is a pass lock sensor on the housing part of the ignition lock alot of times they are either corroded or Just need to be replaced so i figure since I do not have a 5,000 tech 2 I would replace the ignition lock and pass lock sensor and see if that works since its a very common problem and that is why i asked do i need to clear any bcm codes or they clear them selves since i have to do a rearm procedure
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 15, 2011, 9:01 AM
Post #6 of 7
(1279 views)
|
|
Re: changing ignition lock
|
Sign In
|
|
I thought you had already done that. You can just disconnect the battery for 10 minutes or it will eventually clear itself. It won't interfere with the relearn.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
augie729
New User
Apr 15, 2011, 9:20 AM
Post #7 of 7
(1273 views)
|
|
Re: changing ignition lock
|
Sign In
|
|
Oh ok whew LOL I never knew the bcm can clear its self with disconnecting the battery
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
