|
|
buckhunter069
User
Nov 3, 2013, 1:04 PM
Post #1 of 5
(1255 views)
|
|
headlight replacement
|
Sign In
|
|
hey guys. don't want to sound like an idiot here...but how the hell do you replace the bulb in the headlight on a 2004 jeep grand Cherokee limited. there is one long bolt on top, and another star bit bolt that holds the headlight assembly to the grill. I took each off and have very little movement. certainly not enough to replace the bulb. I don't want to snap anything. im sure its simple.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 3, 2013, 1:35 PM
Post #2 of 5
(1239 views)
|
|
Re: headlight replacement
|
Sign In
|
|
Appears that you have removed the long torx jack screw (step 1). Probably a couple of retainer pins holding it in.
here is the rest of the procedure:
2. Grasp upper inboard and lower outboard corners of headlamp and pull headlamp outward.
3. Remove all of the bulb sockets from headlamp module.
4. Separate the headlamp from vehicle.
INSTALLATION
CAUTION: Do not touch the bulb glass with fingers or other oily surfaces. Reduced bulb life will result.
1. Install all of the bulb sockets in headlamp module.
2. Position the headlamp on the vehicle and align the ball studs with the sockets.
3. Push the headlamp inward to secure the ball studs with the sockets.
4. Install the jack screw attaching the top of headlamp to the headlamp mounting module.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Nov 3, 2013, 1:36 PM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 3, 2013, 1:37 PM
Post #3 of 5
(1236 views)
|
|
Re: headlight replacement
|
Sign In
|
|
REMOVAL
- Remove the jack screw attaching the top of headlamp to the headlamp mounting module.
- Grasp upper inboard and lower outboard corners of headlamp and pull headlamp outward.
- Remove all of the bulb sockets from headlamp module.
- Separate the headlamp from vehicle.
Note: It has a ball in a socket type holder on the outside edge. Pry it out with something plastic.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 3, 2013, 1:38 PM
Post #4 of 5
(1235 views)
|
|
Re: headlight replacement
|
Sign In
|
|
You got in while i was uploading DS.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 3, 2013, 1:40 PM
Post #5 of 5
(1233 views)
|
|
Re: headlight replacement
|
Sign In
|
|
The two pins that you have to pop out by pulling outward on the headlamp assembly
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
