Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









'04 Silverado, P0332


Search for (search options)
 



Davisham
New User

Jul 16, 2022, 3:58 AM

Post #1 of 4 (1023 views)
'04 Silverado, P0332 Sign In

Last month, I had this code on my car. I have a question, I just got the knock sensors replaced by the dealership in my 04 Silverado, but about 150 miles later, again, it threw the P0332 code. Is it possible that the dealer did something wrong, or are the sensors fine, and is something else wrong?


(This post was edited by Tom Greenleaf on Jul 16, 2022, 4:33 AM)


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Jul 16, 2022, 4:35 AM

Post #2 of 4 (1018 views)
Re: '04 Silverado, P0332 Sign In

Moved your post to its own thread it was tacked on to another not pertinent this this exact issue or vehicle. Just so you understand only that for now,

Tom



Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Jul 16, 2022, 4:44 AM

Post #3 of 4 (1017 views)
Re: '04 Silverado, P0332 Sign In

OK, now to address this problem. Knock sensors would have wiring to them so it may not have been the senor (sensor 2, bank 2) rather the wire to it.

Since this was dealer done recently the answer is take it back to them tell them what you said here.

Just FYI no doubt it was all reset and took some drive miles/time to come back does suggest it wasn't the sensor to begin with @ the age now IMO just an honest mistake they should take care of for you now,

Tom



Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jul 16, 2022, 6:17 AM

Post #4 of 4 (1006 views)
Re: '04 Silverado, P0332 Sign In

This vehicle had a TSB concerning the knock sensors. They are installed in a recessed hole under the intake and prone to liquids filling the hole and shorting out the sensor. Their cure, strange as it is, is to create a bead of silicone around the hole to create a barrier for liquids running into the hole.

There is also an updated wiring harness for the sensors.







~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



(This post was edited by Hammer Time on Jul 16, 2022, 6:31 AM)






 
 
 






Search for (options) Privacy Sitemap