|
|
P0128 code 07' G6...What needs replacing?
|
|
|
| |
|
mshain81
Novice
Oct 19, 2009, 10:58 AM
Post #1 of 10
(21407 views)
|
P0128 code 07' G6...What needs replacing?
|
|
|
Year of vehicle - 2007 Make of vehicle - Pontiac Model of vehicle - G6 Sedan Engine size - 3.5L V6 Mileage - 55k P0128 - Coolant Thermostat (Coolant Temp Below Thermostat Temp) Check engine light came on a few days ago and I noticed my Engine Temp Gauge was not working. The needle is always burried at the bottom and does not move at all. Stoped by Autozone and they said its probably my sensor. What sensor are they referring too? Coolant Temp Sensor? What else should I check out before buying all kinds of replacement parts? I cant afford to do that anyway. Thanks all.
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Oct 19, 2009, 3:53 PM
Post #2 of 10
(21385 views)
|
Re: P0128 code 07' G6...What needs replacing?
|
|
|
No, it's not likely a sensor. The code is telling you that the engine is running too cool. That's most likely just a bad thermostat. It's important to fix that because it will really effect the fuel mixture because the computer will never go into closed loop. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
mshain81
Novice
Oct 20, 2009, 7:03 AM
Post #3 of 10
(21377 views)
|
Re: P0128 code 07' G6...What needs replacing?
|
|
|
If it was the thermostat, wouldnt my heater be blowing out cold air because its constantly letting coolant into my engine? My heater works just fine. With that being said, its still my thermostat? Is there a way to check it before replacing it? Thank you for your response.
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Oct 20, 2009, 7:10 AM
Post #4 of 10
(21374 views)
|
Re: P0128 code 07' G6...What needs replacing?
|
|
|
Yes, it's the thermostat, just replace it. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Oct 20, 2009, 7:19 AM
Post #6 of 10
(21366 views)
|
Re: P0128 code 07' G6...What needs replacing?
|
|
|
It's not too hard. Flat rate time is a little less than an hour. Make sure you get all the air out after by running it till the fans come on and letting it cool all the way, top off and repeat. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
mshain81
Novice
Oct 20, 2009, 7:39 AM
Post #7 of 10
(21361 views)
|
Re: P0128 code 07' G6...What needs replacing?
|
|
|
Great thank you very much... One last question. Looking at all these different thermostats online and they range from $20 - $75 with different degrees. Whats the difference with the degrees. Does it matter which one I get? See below for examples of what I've found. Stant - $27 180 deg with seal Duralast - $76 185 deg with seal Duralast - $20 195 deg with seal Murry - $26 185 deg with seal AcDelco - $Call Store for price...No deg listed
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Oct 20, 2009, 8:31 AM
Post #8 of 10
(21354 views)
|
Re: P0128 code 07' G6...What needs replacing?
|
|
|
Don't order anything online. Just go to the local auto parts store and they will tell you what the OE temp is. I think it's 195 deg. Get a gasket or O-ring, whichever it takes. It should be under $20. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Bigdaddy63
Novice
Nov 11, 2011, 6:50 PM
Post #9 of 10
(20071 views)
|
Re: P0128 code 07' G6...What needs replacing?
|
|
|
Mr. Hammer, My 2008 started doing the same thing. Once the thermostat is changed, I fill it with coolant, let it run, til the cooling fan comes on and repeat how many times? I found the thermostat, it was 195 OE. and he said I needed permatex? Is this correct or just the gaket is fine? I don't want to mess anything up : ) I really appreciate your help, I am broke!
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 11, 2011, 6:53 PM
Post #10 of 10
(20067 views)
|
Re: P0128 code 07' G6...What needs replacing?
|
|
|
This question is over 2 years old and belongs to someone else. Please start a new question of your own if you need help with something. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|