Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









P0135 O2 Sensor Heater Circuit


Search for (search options)
 



Joelbbvette
New User

Feb 9, 2009, 12:24 PM

Post #1 of 3 (5967 views)
P0135 O2 Sensor Heater Circuit Sign In

My wife has a 1998 Toyota Avalon with the V-6, automatic (don't think they made a stick), 120K miles that got the engine light on. Checked the codes and it reads as a P0135 O2 Sensor Heater circuit.

A quick look at the car shows only O2 sensors in the exhaust manifolds, nothing near the catalytic converter. So is Bank 1 the closest to the firewall or up front? Also should I use any special lubricants on the threads before installing this? Should both be done at once as one is easy and one is going to be a real pain?

Dealership says $157 for the parts and $95 labor, ouch.

Thanks
Joel


Double J
Veteran / Moderator
Double J profile image

Feb 9, 2009, 12:49 PM

Post #2 of 3 (5963 views)
Re: P0135 O2 Sensor Heater Circuit Sign In

Bank 1 is the bank that has the number one cylinder.
In this case,its the cylinder head closest to the firewall.

Bank 1 sensor 1 is in that exhaust manifold.
Bank 2 sensor 1 is in the front exhaust manifold
Which one is showing as faulty?

You can use an anti-seize compound on the threads..new ones may have it on them already.
If not,make sure you get one thats oxygen sensor safe and apply to the threads only.


(This post was edited by JIM N on Feb 10, 2009, 11:51 AM)


Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Feb 9, 2009, 3:57 PM

Post #3 of 3 (5958 views)
Re: P0135 O2 Sensor Heater Circuit Sign In

PO135 is bank one, sensor one. Front cylinder on pass side. This does use a downstream O2, by the way. It should be aft of the catalytic converter.
Loren
SW Washington






 
 
 






Search for (options) Privacy Sitemap