Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
with_replies.gif image   Lukewarm Heat............
New antifreeze reverse flush heater core...

with_replies.gif image   multiple warning lights
2013 GMC Terrain 130,000 miles 4 cylinde...

with_replies.gif image   2014 Nissan Sentra Shaking
Car recently started shaking when accele...

no_replies.gif image   Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
N/A

hot_with_replies.gif image   1989 toyota pickup 3.0 crank no start
I have a 1989 toyota pickup 3.0 crank no...

with_replies.gif image   Strut spring orientation and strut mount tension nut
2017 Nissan rogue awd 2.5 L Put in Monro...

with_replies.gif image   Transmission stuck in part, I have tried everything
So I'm working on my elderly fathers 201...

with_replies.gif image   2017 dodge journey LED headlights on/off randomly
Year of vehicle 2017 Make of vehicle dod...

with_replies.gif image   Kia Soul starter replacement issues!
Okay so my car is a 2010 Kia soul 2.0 en...

hot_with_replies.gif image   Please Help - Knock sound & engine fail
Hi all, Hoping to get some insight and ...




fault code

Search for (search options)
 



southensoldier
User

Jan 15, 2009, 5:31 PM

Post #1 of 3 (2454 views)
fault code Sign In
my 92 honda accord gives me a fault code of 12 and the check engine light comes on. The book says to check the EGR and hoses, but wha am I looking for???? Also after about 5 minutes of idling it starts to sparatically idle. Any ideas on what the cause here....


Todd Norton
User

Feb 28, 2009, 1:42 PM

Post #2 of 3 (2382 views)
Re: fault code Sign In
would like to help but need more info like what engine, any recent repairs ,mileage , carb or injected..ect let us know ..k ..........ToddSmile


Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Feb 28, 2009, 5:49 PM

Post #3 of 3 (2378 views)
Re: fault code Sign In
soldier; Pardon my jumping in here. Code 12 is EGR system. From the symptoms you describe, it could be that the EGR is stuck partially open. Sometimes a piece of carbon will get stuck between the pintle and seat. This will usually happen, or at least be noticed, on deceleration from above 40mph. You can remove the EGR valve and visually inspect the pintle area. You'll see two passages. One with the pintle, and the other an open port. You shouldn't be able to blow through the two. Or, you can pour water in one and see if it leaks through. Sometimes, you can use carb cleaner and clean the pintle/seat. The vacuum line going to the EGR valve should NOT have vacuum to it at idle. If it does, then there is a problem with the EGR sensor/switch. If you have a vacuum pump, you can apply 14hg to the valve. The engine should at least stumble, if not die. If no change, the valve either isn't opening at all, or it's already stuck in the open position. The fuel injection will see this as extra air and command more fuel to try and compensate. But, don't run out and buy and EGR valve, yet. Let's make sure it's the valve, first.
Loren
SW Washington





 
 
 






Search for (options) Privacy Sitemap