Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









1973 Mach 1 Mustang Distributor trouble!


Search for (search options)
 



UglyMuffin
New User

Sep 24, 2019, 4:47 PM

Post #1 of 4 (1430 views)
1973 Mach 1 Mustang Distributor trouble! Sign In

Hi All!

I'm restoring a classic 1973 Mach 1 Mustang, (351 Cleavland) and recently ran into a rather frustrating problem. The distributor won't budge. I loosened the bolt clamping the distributor to the engine block, but nothing changed. The distributor won't move at all. Any help would be appreciated! Thanks.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Sep 24, 2019, 5:56 PM

Post #2 of 4 (1425 views)
Re: 1973 Mach 1 Mustang Distributor trouble! Sign In

It's seized into the block. You can keep hitting it with penetrating oil and slowly tap it back and forth until it works loose. It might take a while and you likely will have to replace the distributor when you get it out.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



UglyMuffin
New User

Sep 24, 2019, 8:48 PM

Post #3 of 4 (1408 views)
Re: 1973 Mach 1 Mustang Distributor trouble! Sign In

oh man, that sounds bad. We don't need to remove the distributor, we just need to twist it, (adjust timing) is there any bolt that we're missing, or a trick to it??


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Sep 24, 2019, 11:13 PM

Post #4 of 4 (1377 views)
Re: 1973 Mach 1 Mustang Distributor trouble! Sign In

No trick I know of. TMK, 1/2" bolt, the holding "U" type bar out of the way. Lube it there as already said. Try PB expect to redo or replace distributor. "Twist and Shout" till it come OUT. Oh, that rhymes,


T







 
 
 






Search for (options) Privacy Sitemap