|
|
shranda
New User
Nov 23, 2007, 11:35 AM
Post #1 of 2
(3021 views)
|
1993 K5 Blazer 5.7 350
|
Sign In
|
|
I'm having some trouble. I put new plugs and wires and a new starter on my truck and after finishing, every time my rpms would get around 1400, my truck seemed to be stalling out on me until the rpms got lower or higher. Then it just stalled out and wont even crank back up. I have no idea what is wrong with it now. Can someone PLEASE help me out here. I'm literally at a loss.
Thanks,
Shranda
|
|
| |
|
|
Vinnysnismo
User
Nov 29, 2007, 12:33 PM
Post #2 of 2
(3007 views)
|
|
Re: 1993 K5 Blazer 5.7 350
|
Sign In
|
|
Check the gap in the plugs... were they pre-gapped? If so never trust pre gapped plugs. one time i got the wrong plugs for a car and the thing would run....but it would stall out due to the wrong gap size. The gap was only .10 off but that was enough to make a change. (did it run fine before?) The problem is not the starter... you may have gotten a bad wire or a plug with a broken electrode. What plugs did you get (ac-delco, bosh, ngk) Most chevys run best on ac-delco plugs. I have a 1985 GMC with a 350 and if i get the bosh plugs...they foul out in less than a month.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 