|
|
|
1995 Olds Cutlass--Lost Spark
|
|
|
| |
|
|
avery53
New User
Nov 24, 2009, 11:03 AM
Post #1 of 9
(1901 views)
|
|
1995 Olds Cutlass--Lost Spark
|
Sign In
|
|
1995 Olds Cutlass Supreme
3.1 Engine 140,000 miles
I had a head gasket leaking. I changed the gaskets, hooked everything back up, but now have no spark to the plugs.
I took all the wire connections back apart, checked them for corrosion, broken wires, etc, but found nothing.
Engine cranks over just fine, but no fire.
This engine ran great before the gasket change. I was just getting air into my cooling system, leading to overheating problems.
I have repeatably checked, and double checked connections.
Am I overlooking something? HELP!!!!!!!!!!
Thanks
avery
|
|
| |
|
|
Loren Champlain Sr
Veteran
/ Moderator
Nov 24, 2009, 6:37 PM
Post #2 of 9
(1893 views)
|
|
Re: 1995 Olds Cutlass--Lost Spark
|
Sign In
|
|
avery; The intake and exhaust pushrods are of different lengths. Are you certain that you are lacking spark? Very easy to get the pushrods mixed up, which can bend valves, collapse lifters, ect.
Loren
SW Washington
|
|
| |
|
|
avery53
New User
Nov 24, 2009, 7:17 PM
Post #3 of 9
(1889 views)
|
|
Re: 1995 Olds Cutlass--Lost Spark
|
Sign In
|
|
Loren, I read about the pushrod different length's before I tore it down.
I made slits in the bottom of a cardboard box to put each pushrod in to maintain correct order for reassembly.
Thanks
avery
|
|
| |
|
|
chickenhouse
Enthusiast
Nov 24, 2009, 9:04 PM
Post #4 of 9
(1883 views)
|
|
Re: 1995 Olds Cutlass--Lost Spark
|
Sign In
|
|
Might try taking the coil packs off and take the ignition control module to like O'reily's or Autozone where they can hook it up and test to make sure that's not the prob.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 25, 2009, 3:38 AM
Post #5 of 9
(1879 views)
|
|
Re: 1995 Olds Cutlass--Lost Spark
|
Sign In
|
|
All "crank, no start" conditions are approached in the same way. Every engine requires certain functions to be able to run. Some of these functions rely on specific components to work and some components are part of more than one function so it is important to see the whole picture to be able to conclude anything about what may have failed. Also, these functions can ONLY be tested during the failure. Any other time and they will simply test good because the problem isn't present at the moment.
If you approach this in any other way, you are merely guessing and that only serves to replace unnecessary parts and wastes money.
Every engine requires spark, fuel and compression to run. That's what we have to look for.
These are the basics that need to be tested and will give us the info required to isolate a cause.
1) Test for spark at the plug end of the wire using a spark tester. If none found, check for power supply on the + terminal of the coil with the key on.
2) Test for injector pulse using a small bulb called a noid light. If none found, check for power supply at one side of the injector with the key on.
3) Use a fuel pressure gauge to test for correct fuel pressure, also noticing if the pressure holds when key is shut off.
4) If all of these things check good, then you would need to do a complete compression test.
Once you have determined which of these functions has dropped out,
you will know which system is having the problem.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
avery53
New User
Nov 25, 2009, 7:45 AM
Post #6 of 9
(1871 views)
|
|
Re: 1995 Olds Cutlass--Lost Spark
|
Sign In
|
|
Lacking the correct equiptment to do all the testing required, I have GM mechanic coming this evening to check things out for me.
Thank you all for helping me.
avery
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Nov 25, 2009, 10:43 AM
Post #7 of 9
(1865 views)
|
|
Re: 1995 Olds Cutlass--Lost Spark
|
Sign In
|
|
Double check all the connectors you took apart, especially the ones to the ign module. Maybe take module ones back off & make sure you didn't bend any pins. Also get a test light & check the fuses....
|
|
| |
|
|
avery53
New User
Nov 25, 2009, 3:37 PM
Post #8 of 9
(1859 views)
|
|
Re: 1995 Olds Cutlass--Lost Spark
|
Sign In
|
|
Well, before the repairman showed up, I decided to give it ONE more look see.
Climbing under the car I traced the wires coming out of the crank sensor on side of the engine.
The wire disappears after a few inches, and can not be seen. I then go up under the master cylinder, virtually standing on my head, reaching down to find the wires. I find them, and DUH, there is the wire. It had fallen down as far as it could go without falling out the bottom.
The wire I had plugged into the module was the  ------------------hood light.
Talk about feeling like a moron, geeeezzzz!
Plugged it in, problem solved.
Thanks again everyone
Bonehead (avery)
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Nov 25, 2009, 5:22 PM
Post #9 of 9
(1857 views)
|
|
Re: 1995 Olds Cutlass--Lost Spark
|
Sign In
|
|
LOL..... good job on finding the wire. Don't ya hate it when that happens 
I guess that also explains why the module was lighting up every time you opened the hood.....
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
