Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN






1998 Pontiac Grand Prix - Engine trouble


Search for (search options)
 



bootawnya
New User

Aug 19, 2011, 6:12 PM

Post #1 of 2 (2544 views)
1998 Pontiac Grand Prix - Engine trouble Sign In

What are the possible cause/solution to the flywheel not turning. I have a 3.8, last time I drove, engine light started flashing and engine was dying out. parked car, now car will not start, ignition fires and if I back turn engine, it will fire more but it gets to a place where it appears to just stop. Any ideas.


Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Aug 21, 2011, 11:04 AM

Post #2 of 2 (2512 views)
Re: 1998 Pontiac Grand Prix - Engine trouble Sign In

The 3.8L were notorious for upper intake gaskets leaking and allowing coolant to leak into the combustion chambers and hydrolocking the engine. Remove the throttle body and use a flash light to peer in the intake throat. Look for coolant laying on top of the lower intake. Remove all the spark plugs, disable the ignition by unplugging the ignition control module connector, then crank the engine. If coolant sprays out of the plug holes, replace the upper and lower intake gaskets and purge remaining coolant in the cylinders You should also replace the upper intake manifold and install the revised EGR pipe. Dorman sells a complete intake kit with revised tube to resolve your issue.

Don't continue cranking on the engine because you'll either break the starter nose off or bend a connecting rod.





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.

(This post was edited by Discretesignals on Aug 21, 2011, 11:07 AM)






 
 
 






Search for (options) Privacy Sitemap