|
|
|
1999 nissan sentra wont start
|
|
|
| |
|
|
mrmill318
New User
Jul 19, 2010, 5:35 AM
Post #1 of 6
(4404 views)
|
|
1999 nissan sentra wont start
|
Sign In
|
|
im working on a 1999 nissan sentra with a 1.6 4 cylinder. automatic transmission. car has about 200,000 miles. my sister was driving the car, stopped at a stop sign, hit the gas and the car wouldnt go. she then killed the car and now it wont start back up. i put a guage in the fuel line and came up with about 60 psi of fuel pressure. i pulled each plug and ran a compression test, and came up with about 70 psi per cylinder. i unbolted the fuel rail and all injectors are spraying. all plugs had a blue arc when checked outside the cylinder. put a timing light on it to make sure the car was firing with the plugs in the hole and the light worked so they are. code reader pulled no codes. i am stumped. help please
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 19, 2010, 5:39 AM
Post #2 of 6
(4400 views)
|
|
Re: 1999 nissan sentra wont start
|
Sign In
|
|
Those compressions readings are too low. It would also be very unusual for all of them to read the same like that. You may have a timing chain problem with that kind of mileage but I'd double check those compression readings.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
mrmill318
New User
Jul 19, 2010, 5:50 AM
Post #3 of 6
(4395 views)
|
|
Re: 1999 nissan sentra wont start
|
Sign In
|
|
i will double check them. i was told that they should be between 60 and 80 as well as be consistant. the actual readings were 70, 70, 69, and 72. is this info not correct?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 19, 2010, 6:23 AM
Post #4 of 6
(4390 views)
|
|
Re: 1999 nissan sentra wont start
|
Sign In
|
|
I don't know where you got that info but it's totally wrong Normal is close to 200 for that engine and minimum is supposed to be 170
Here are the factory specs
- Always use a fully-charged battery to obtain specified engine speed. Compression pressure: kPa (kg/cm, psi)/rpm
Standard: 1,373 (14.0, 199)/350
Minimum: 1,177 (12.0, 171)/350
Maximum Difference limit between cylinders: 98 (1.0, 14)/350
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
mrmill318
New User
Jul 19, 2010, 6:29 AM
Post #5 of 6
(4387 views)
|
|
Re: 1999 nissan sentra wont start
|
Sign In
|
|
so if the compression is too low, would that mean a timing chain problem? i thought that if the chain was broke it wouldnt have any compression.
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Jul 19, 2010, 7:27 PM
Post #6 of 6
(4380 views)
|
|
Re: 1999 nissan sentra wont start
|
Sign In
|
|
Broken.....yes
Jumped a tooth or stretched.....no
(This post was edited by Sidom on Jul 19, 2010, 7:27 PM)
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
