|
|
|
89 ford f150 302fi stalling
|
|
|
| |
|
|
lorraine
New User
Sep 26, 2009, 5:22 AM
Post #1 of 2
(3958 views)
|
|
89 ford f150 302fi stalling
|
Sign In
|
|
89 ford f150 302 fi truck will run fine for 2 to3 miles then stall out.hard to restart if you don't let truck sit for15 to 30 minutes.new gas tank,fuel pump,fuel filter,ignition module,tps sensor,air fuel sensor, coolant sensor. took truck off road to do body work for about a month hasn't run right since
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 26, 2009, 7:15 AM
Post #2 of 2
(3951 views)
|
|
Re: 89 ford f150 302fi stalling
|
Sign In
|
|
All "crank, no start" conditions are approached in the same way. Every engine requires certain functions to be able to run. Some of these functions rely on specific components to work and some components are part of more than one function so it is important to see the whole picture to be able to conclude anything about what may have failed. Also, these functions can ONLY be test during the failure. Any other time and they will simply test good because the problem isn't present at the moment.
If you approach this in any other way, you are merely guessing and that only serves to replace unnecessary parts and wastes money.
Every engine requires spark, fuel and compression to run. That's what we have to look for.
These are the basics that need to be tested and will give us the info required to isolate a cause.
1) Test for spark at the plug end of the wire using a spark tester. If none found, check for power supply on the + terminal of the coil with the key on.
2) Test for injector pulse using a small bulb called a noid light. If none found, check for power supply at one side of the injector with the key on.
3) Use a fuel pressure gauge to test for correct fuel pressure, also noticing if the pressure holds when key is shut off.
4) Perform a complete compression test and record the results. All cylinders should be over 120lbs in most cases and all be within 10% of each other.
Once you have determined which of these functions has dropped out,
you will know which system is having the problem.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
| | |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 