|
|
|
97 chevy 5.7 with gas in oil
|
|
|
| |
|
|
rlwaller81
New User
Jul 27, 2013, 7:09 AM
Post #1 of 8
(5349 views)
|
|
97 chevy 5.7 with gas in oil
|
Sign In
|
|
My 97 chevy 1500 with the 5.7 is getting gas in the oil. Every few days it shows a little higher on the dip stick when checking it, and there is no doubt that it is gas thats getting in it. A local mechanic replaced the spider assembly including all injectors and it was still getting in it. Found that the new spider assembly was leakin and replaced it again. Well here it is a few days later after 2 new spider assemblies, pressure tested intake and cooling system that passed and each injector tested for leaks or spraying streams and its still gas getting into the oil pan with the oil. Truck has started knocking really bad for about 2 mins when first cranked in the mornings. Is there anything else besides the spider assembly and the injectors that could cause this problem or is this spider assembly bad like the last new one we had put in? Any help or more info you could give me would be greatly appreciated. Thanks.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 27, 2013, 7:12 AM
Post #2 of 8
(5348 views)
|
|
Re: 97 chevy 5.7 with gas in oil
|
Sign In
|
|
What does the fuel pressure do when the engine is shut off? How much does it drop and how fast?
Did your injector assembly include a regulator?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on Jul 27, 2013, 7:12 AM)
|
|
| |
|
|
rlwaller81
New User
Jul 27, 2013, 7:17 AM
Post #3 of 8
(5339 views)
|
|
Re: 97 chevy 5.7 with gas in oil
|
Sign In
|
|
Havent paid any attention to it but i will find out and let you know as soon as possible. Thanks.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 27, 2013, 7:21 AM
Post #4 of 8
(5337 views)
|
|
Re: 97 chevy 5.7 with gas in oil
|
Sign In
|
|
You might also want to check for the temp sensors being accurate through the scan tool.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
rlwaller81
New User
Jul 27, 2013, 7:37 AM
Post #5 of 8
(5325 views)
|
|
Re: 97 chevy 5.7 with gas in oil
|
Sign In
|
|
The assembly came with a regulator as well, and im not sure how to test the oil pressure after turning the engine off cause the gauges turn off as well. I checked the truck with the problem and another vehicle and when turned off, the oil pressure gauge on both of them dropped to 0 instantly. The mechanic that put both the assemblies in is the best in our area as well, he very rarely makes mistakes and i know he wouldnt make the same one twice. Im just not sure if hes looking in the right place.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 27, 2013, 7:40 AM
Post #6 of 8
(5324 views)
|
|
Re: 97 chevy 5.7 with gas in oil
|
Sign In
|
|
Who said anything about oil pressure? I want to know what the fuel pressure is doing. You need to use an accurate fuel pressure gauge.
If this mechanic is any good at all, you should have to be asking us this question.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on Jul 27, 2013, 7:41 AM)
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jul 27, 2013, 9:25 AM
Post #7 of 8
(5309 views)
|
|
Re: 97 chevy 5.7 with gas in oil
|
Sign In
|
|
Your mechanic will probably have to put a shut off valve somewhere on the supply line at the filter. That way if he is checking for leaks, he won't get confused by the fuel pump check valve bleeding the pressure off.
If the return line is plugged up, it will cause high fuel pressure. Enough to rupture something such as a regulator diaphragm.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Jul 27, 2013, 9:29 AM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 27, 2013, 12:08 PM
Post #8 of 8
(5300 views)
|
|
Re: 97 chevy 5.7 with gas in oil
|
Sign In
|
|
I'm not too concerned about supply bleed down. There is no long crank complaint and that will just confuse him.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
