|
|
KarenWS
Novice
Jan 8, 2012, 3:47 PM
Post #1 of 17
(2743 views)
|
|
Carburetor problems
|
Sign In
|
|
I have a 1975 Camaro with a 1997 V-8 Vortec engine out of a Suburban, and a 4 bbl Holley carburetor.
I've been having problems keeping the motor running, had the carburetor rebuilt with a kit from O'Reilly's. Also changed the plugs and wires.
I've had two different "backyard" mechanics mess with it, and we've got it where it will stay running in idle, but have had problems keeping the motor running when we put it in gear. I have no idea what to do next.
I am looking to sell the car, but want it in running condition so they can at least get it home. Short of putting a new carburetor on it, what can we try?
Thank you,
Karen
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Jan 8, 2012, 3:53 PM
Post #2 of 17
(2726 views)
|
|
Re: Carburetor problems
|
Sign In
|
|
If the carb was put together right it shouldn't need replacement. It needs to be tuned and adjusted. You need someone very familiar with this sort of thing to do it right. Also, verify the ignition timing and advance are adjusted right and you have no vacuum leaks. Does the idle change when you press down the brake pedal? If that affects it you would have a leaking brake booster. It may be something very simple that is being overlooked that is causing the problem.
|
|
| |
|
|
KarenWS
Novice
Jan 8, 2012, 3:58 PM
Post #3 of 17
(2723 views)
|
|
Re: Carburetor problems
|
Sign In
|
|
Yes, the idle changes when you step on the brakes. It starts to choke up at that point, then putting it in gear makes the motor die. The brake fluid is low, will get that looked at this week. I sure hope it's something simple! Thank you for your response!
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Jan 8, 2012, 4:02 PM
Post #4 of 17
(2717 views)
|
|
Re: Carburetor problems
|
Sign In
|
|
Brake fluid being low would indicate a leak in the brake hydraulic system. It would be a seperate issue to look at but won't affect the way the engine runs. The vacuum booster that the master cylinder mounts to uses engine vacuum to make it easier for you to use the brakes. If it leaks vacuum then your engine vacuum will drop when you hold the brakes and can stall or nearly stall your engine. Without trying to put it in gear, push and hold the brakes. If it starts sputtering out and trying to die then replace the vacuum booster. Its probably original and after all those decades under the hood no surprise to see it go out.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jan 8, 2012, 4:05 PM
Post #5 of 17
(2714 views)
|
|
Re: Carburetor problems
|
Sign In
|
|
Has this motor ever run good with that setup?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
KarenWS
Novice
Jan 8, 2012, 4:07 PM
Post #6 of 17
(2709 views)
|
|
Re: Carburetor problems
|
Sign In
|
|
Thank you, Nick. I'll have him replace the vacuum booster and hope that does it. He did check the vacuum while it was in idle, but not with the brake pedal depressed.
Thank you so much for the info!
Karen
|
|
| |
|
|
KarenWS
Novice
Jan 8, 2012, 4:10 PM
Post #8 of 17
(2701 views)
|
|
Re: Carburetor problems
|
Sign In
|
|
Hammer - it's been running great until this past summer. Have had these problems since then. Spent almost $400 in repairs already, could have bought a new carb.
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Jan 8, 2012, 4:18 PM
Post #9 of 17
(2695 views)
|
|
Re: Carburetor problems
|
Sign In
|
|
Hammer Time poses a question I should've asked. Did this ever run right as it is set up? If you want to try an easy test, pinch off the rubber hose running from the intake manifold to the brake booster. Then hold the brake so the car doesn't run off and put it in gear. See if you can do that without stalling. Then you are assured its the booster causing the issue.
|
|
| |
|
|
KarenWS
Novice
Jan 8, 2012, 4:20 PM
Post #10 of 17
(2695 views)
|
|
Re: Carburetor problems
|
Sign In
|
|
I'll have him replace the vacuum booster and hope that does it Don't do that until you have actually proven it has a problem. All you have to do is simply pinch off the hose to see if that corrects the problem.
Thanks Hammer. We'll check it out first. He says it might just be the vacuum hose. Said it was cracked.
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Jan 8, 2012, 4:29 PM
Post #12 of 17
(2689 views)
|
|
Re: Carburetor problems
|
Sign In
|
|
The hose being cracked would leak vacuum all the time. Definately replace it and closely look at all the other vacuum hoses. The hose is cheap, so if there is any question about it replace it. Multiple small leaks add up to a big problem together. No matter what new parts you replace, if the hoses leak vacuum this will never run right.
|
|
| |
|
|
KarenWS
Novice
Jan 8, 2012, 4:34 PM
Post #13 of 17
(2685 views)
|
|
Re: Carburetor problems
|
Sign In
|
|
I definitely will! Heck, if I get it running really good again and get the brakes fixed, I may end up keeping it!
|
|
| |
|
|
dr.donut
User
Jan 9, 2012, 6:37 AM
Post #14 of 17
(2653 views)
|
|
Re: Carburetor problems
|
Sign In
|
|
if you rebuilt that holly carb on your own I wouldn't assume it's O.K. those things are like a swiss watch
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jan 10, 2012, 9:32 AM
Post #15 of 17
(2626 views)
|
|
Re: Carburetor problems
|
Sign In
|
|
Notes: It didn't change "rebuilding" the carb so may not be the issue. Brake booster as that changes it is on the list as mentioned already. Worn or leaking brake parts just sitting there shouldn't alter engine performance except for vacuum to (hose) or booster and if you find that bad get a new check valve right at the booster too - in fact they are pretty cheap so try that first but unless cracked probably not it but it could break at the age just taking it out,
T
|
|
| |
|
|
KarenWS
Novice
Jan 10, 2012, 4:51 PM
Post #17 of 17
(2615 views)
|
|
Re: Carburetor problems
|
Sign In
|
|
Thank you, Dr. Donut, Tom and Re-Tired! I have noted all these things to have checked out this weekend. I really appreciate everyone's input!
Karen
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
