Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Jeep- Belt/Steering Issue


Search for (search options)
 



JayB
Novice

Nov 29, 2010, 11:27 AM

Post #1 of 14 (1385 views)
Jeep- Belt/Steering Issue Sign In

Hello, gang. I used the search function to try and see if this has been covered already, but I didn't see a close result.

03 Jeep Liberty...
Started it the other night, felt a small jerk and went to back out, but the power steering wasn't working. I suspected a fuse, as I blew one once in my wife's car while using it to jump another. I looked at my fuses...the guide inside the cap didn't show one for power steering in my Jeep.

Immediately looked around and noticed that the main serpentine belt on the front of my engine was dangling loose. My neighborhood has stray cats that climb up under hoods for warmth (I found that out in the worst way last winter). I suspect one of them may have knocked the belt free.

I replaced it to where the belt should be, but the belt is loose. Picture- http://twitpic.com/3be30u

Any ideas? Did I miss something with the belt? Is the belt shot? If I should include more information, let me know. Thanks in advance.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Nov 29, 2010, 11:54 AM

Post #2 of 14 (1378 views)
Re: Jeep- Belt/Steering Issue Sign In

You don't have it routed correctly.
Be prepared. Something made that belt come off and you haven't resolved that yet.





~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



(This post was edited by Hammer Time on Nov 29, 2010, 11:55 AM)


JayB
Novice

Nov 29, 2010, 12:23 PM

Post #3 of 14 (1370 views)
Re: Jeep- Belt/Steering Issue Sign In

Thanks Hammer. I was lookingat an image of a different config...suspected I had it wrong.

Any tips for getting the belt on there completely? Seems too tight to get it on easily now. Took off the idler pulley or the tensioner, to fit the belt properly, but now I can't seem to get it back on with the belt wrapped over it.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Nov 29, 2010, 12:29 PM

Post #4 of 14 (1366 views)
Re: Jeep- Belt/Steering Issue Sign In

Just make sure your seated in all the grooves of every pulley and save one of the smooth pulleys for last.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



JayB
Novice

Nov 29, 2010, 1:00 PM

Post #5 of 14 (1362 views)
Re: Jeep- Belt/Steering Issue Sign In

out of time & at the finger pain threshold, so I will give it a crack again later or tomorrow. Thanks for the replies.


JayB
Novice

Nov 30, 2010, 1:11 PM

Post #6 of 14 (1354 views)
Re: Jeep- Belt/Steering Issue Sign In

Hammer...you got any more tips? I have tried for hours to get this belt on and no luck. Removed the tensioner to get the belt over it, then screw the blot back in...not enough slack for that OR to simply slip the belt over one of the smooth pulleys.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Nov 30, 2010, 1:13 PM

Post #7 of 14 (1351 views)
Re: Jeep- Belt/Steering Issue Sign In

They are never easy. Make sure you have the right belt.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



JayB
Novice

Nov 30, 2010, 1:17 PM

Post #8 of 14 (1348 views)
Re: Jeep- Belt/Steering Issue Sign In

It was the only belt dangling around...so it's the one that's been occupying this area for a while.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Nov 30, 2010, 2:43 PM

Post #9 of 14 (1343 views)
Re: Jeep- Belt/Steering Issue Sign In

I mean make sure they sold you the correct new belt.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



JayB
Novice

Nov 30, 2010, 5:03 PM

Post #10 of 14 (1338 views)
Re: Jeep- Belt/Steering Issue Sign In

So...the car won't go anyplace, so I don't have a new belt...wanted to get this one that came off back on.

I am looking at some illustrations

and this video...
links deleted

They show that the tensioner should easily move and allow me to get the belt over it, but all I can do is take the whole thing off, but that doesn't help...as I've stated, I can NOT* screw the bolt back on w/ the belt looped over the tensioner pulley. What am I doing wrong?


(This post was edited by JayB on Nov 30, 2010, 5:15 PM)


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Nov 30, 2010, 5:17 PM

Post #11 of 14 (1330 views)
Re: Jeep- Belt/Steering Issue Sign In

You can't post links like that here.

I don't know how you are trying to do this but you need to route the belt around every pulley except one. In this setup, I would leave the alternator until last. Put a socket on the tensioner bolt and hold the belt snug with your right hand. Now pull the tensioner against the spring until it stops with your left hand and simultaneously slip the belt over the last pulley with your right hand. It may be tight and you may have to get it started and then push it on the rest of the way with the heel of your hand.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



JayB
Novice

Nov 30, 2010, 5:36 PM

Post #12 of 14 (1326 views)
Re: Jeep- Belt/Steering Issue Sign In

I can't post links that show what other material I am looking at besides the advice you are giving me? That makes this process less helpful. The video example showed how easy this should be...and it is not easy for me.

Anyway...like I said, there is no give with the tensioner. It won't move. So what I am asking is...why won't this move to give me the slack that I need?


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Nov 30, 2010, 5:40 PM

Post #13 of 14 (1322 views)
Re: Jeep- Belt/Steering Issue Sign In

You don't need to post an instructional video for everyone else to see. You can see it yourself. We already know how to do it.
I don't know why you can't move the tensioner. You may be trying to move it the wrong way or you may not even be on the tensioner.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



JayB
Novice

Nov 30, 2010, 6:23 PM

Post #14 of 14 (1317 views)
Re: Jeep- Belt/Steering Issue Sign In

Thanks for the time. A bigger ratchet (and maybe the wd40) did the trick.






 
 
 






Search for (options) Privacy Sitemap