Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN






Starting Problem - '93 Honda Civic DX


Search for (search options)
 



brianf8
Novice

Aug 1, 2008, 10:31 AM

Post #1 of 1 (1816 views)
Starting Problem - '93 Honda Civic DX Sign In

Hey Guys,

My Civic sat in the parking lot for a long weekend and when starting this morning it turned over briefly but then shut off. Subsequent tries resulted in the engine cranking but not turning over. One time there was a loud ringing noise and the flywheel did not seem to engage. This was my first time working on the starting system, so I probably did a few things out of order...

I took the started out and verified the motor and solenoid were both working. After replacing, the pinion engaged, engine turned over, but no firing. I checked out my distributor cap and coil, both appear fine. I don't have a of spare hands right now so I haven't been able to check for a spark while cranking.

I tried getting the ECU code; however, when working on the distributor I took off my ground cable for a period of time which I believe will reset the ECU. I've read that you can crank the ignition for > 10s and the ECU will register a problem (if there is one with the ignition system). Any thoughts?

Also, with all this starting I assume I would have flooded the engine by now, but I haven't smelled any gas. My next step is to make sure my fuel pump runs for 2s when turning the key. Any other advice???

Thanks in advance!






 
 
 






Search for (options) Privacy Sitemap