|
|
Gezzer
New User
May 6, 2015, 8:00 AM
Post #1 of 6
(1366 views)
|
|
chevrolet 350 oil issues
|
Sign In
|
|
1972
Chevrolet
corvette
350
111000
Engine oil bypass issue.
Attempting to start engine and the oil will leak oil at a high rate with pressure from the filter base on the block. Have tried several type s of filter with the same result. This car has set for 11 years inside. Any ideas before I rebuild?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 6, 2015, 8:05 AM
Post #2 of 6
(1364 views)
|
|
Re: chevrolet 350 oil issues
|
Sign In
|
|
Have you taken a reading on your oil pressure?
Are you sure it's coming by the filter seal?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Gezzer
New User
May 6, 2015, 12:30 PM
Post #3 of 6
(1351 views)
|
|
Re: chevrolet 350 oil issues
|
Sign In
|
|
yes. there is no oil leakage above this area. The very short time the engine ran (30-45 sec) I did not have the chance to look at the oil pressure indication. the oil blows pass the filter seal area very fast. I'm trying not to damage any bearing, but looks like a rebuild anyway..........
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 6, 2015, 4:28 PM
Post #4 of 6
(1340 views)
|
|
Re: chevrolet 350 oil issues
|
Sign In
|
|
I wouldn't5 be jumping to that conclusion. There should be a base that the filter attaches to that can leak also.
If it's actually blowing out oil filters, then you must have too much oil pressure which could just be a check valve in the oil pump.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Gezzer
New User
May 6, 2015, 6:23 PM
Post #5 of 6
(1335 views)
|
|
Re: chevrolet 350 oil issues
|
Sign In
|
|
thanks for the reply........I'm going to pull the oil pan and look at the pump....
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 6, 2015, 6:25 PM
Post #6 of 6
(1334 views)
|
|
Re: chevrolet 350 oil issues
|
Sign In
|
|
Why would you do that without even taking a pressure reading/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
