|
|
teri
User
Jun 22, 2014, 1:34 PM
Post #1 of 6
(1467 views)
|
\\\I have a 2005 dodge Durango 4.7L, replaced the heads, valves, cam shaft and installed 2 oil pumps, changed the oil sending unit and PCV my problem is I can drive for about 20 miles and the oil light starts blinking and then stays on the I hear the lifters rattle. I need advice on what to check on next I am at my wits end.
Teri
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jun 22, 2014, 2:02 PM
Post #2 of 6
(1458 views)
|
Have you connected a pressure gauge to monitor oil pressure? You could have main or rod bearing clearance issues or even a gallery plug leaking.
It is hard to find the source of the problem because you can't see inside the engine. There are only two ways of finding out where the pressure is being lost. One is to drop the pan and connect a pressurized oil tank to the lubrication system and watch to see where excessive oil is coming from. Number two is tearing down the engine and inspecting everything.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Jun 22, 2014, 2:07 PM)
|
|
| |
|
|
kev2
Veteran
Jun 23, 2014, 3:50 AM
Post #3 of 6
(1437 views)
|
in addition to my colleagues ideas- quick & EASY
When the pressure drops - quickly check
what is the oil level in the pan?
If there is oil is it aerated, ?
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jun 23, 2014, 4:42 AM
Post #4 of 6
(1435 views)
|
Refresh from top: Quote:"2005 dodge Durango 4.7L, replaced the heads, valves, cam shaft and installed 2 oil pumps, changed the oil sending unit and PCV my problem is I can drive for about 20 miles and the oil light starts blinking and then stays on the I hear the lifters rattle."
**************
You are hearing it and warnings of low oil pressure so I believe it and mechanical gauge would prove it. Did you replace the pick up tube and screen? looks like this as you should know........
If somehow that is bent or sucking air for any reason that's a good reason for this. To be replaced with oil pump every time. IDK if one matches another exactly?
Cam replacement: If bearings are spilling out way too much oil pressure would plummet too.
Just thoughts for now as you've been back there twice......
T
(Edit one more thought) If oil collects in valve covers not returning for any reason that too. Some and IDK on this if gaskets are wrong or different one side to another or upside down might take a while to return oil but would think not enough right away if that?
(This post was edited by Tom Greenleaf on Jun 23, 2014, 4:45 AM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jun 23, 2014, 9:33 AM
Post #5 of 6
(1427 views)
|
I have a question for you..........
Has anyone ever got the bright idea to do an engine flush to this?
Has it ever had a timing chain let go?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
teri
User
Jun 23, 2014, 1:53 PM
Post #6 of 6
(1415 views)
|
thanks, I will have that done
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Subaru Forester white smoke at start up
1989 toyota pickup 3.0 crank no start
