|
|
robbskllz
New User
Oct 6, 2009, 12:04 PM
Post #1 of 2
(1181 views)
|
Hello, i have a 99 nissan sentra, its auto, 1.6ltr engine,,now,,the solenoid is giving me problems,,i have to start the car tapping the starter with a metal pipe,,i would like to replace this but it seems that i cant get to it,,do i have to remove motor mounts and whatnot to do this ?????
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Oct 6, 2009, 12:44 PM
Post #2 of 2
(1178 views)
|
You need to replace the whole starter. It's not real easy to access but it can be changed from the bottom.
Here are the instructions
REMOVAL
- Remove battery negative cable from battery.
- Remove intake air duct.
- Remove starter motor mounting bolts.
- Remove battery cable from starter motor.
- Disconnect harness connector from starter motor harness.
- Remove starter motor:
- from transaxle side [GA engine (M/T)].
- from engine side [GA engine (A/T)].
INSTALLATION
Installation procedure is basically the reverse order of removal.
Torque: 31 - 42 N-m (3.3 - 4.3 kg-m, 23 - 31ft-lb)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 