|
|
|
vibration after timing belt changed
|
|
|
| |
|
|
rs2001
New User
Mar 16, 2010, 5:32 PM
Post #1 of 8
(5255 views)
|
vibration after timing belt changed
|
Sign In
|
|
hi there i need help i have a 2001 mitsubishi eclipse rs 2.4l had my timing belt and balaner belt changed know the gas pedal vibrates slighty at 3000rpm then at 4500 it vibrates like crazy it feels like its reving out to early could it be possiable the timing could be of slighty
|
|
| |
|
|
steve01832
Veteran
Mar 16, 2010, 5:36 PM
Post #2 of 8
(5252 views)
|
|
Re: vibration after timing belt changed
|
Sign In
|
|
I'd definately bring it back to the shop as soon as possible. They should double check the timing marks.
Steve
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Mar 16, 2010, 5:57 PM
Post #3 of 8
(5249 views)
|
|
Re: vibration after timing belt changed
|
Sign In
|
|
That's what that second belt is there for and it doesn't use timing marks. They may no know how to time it. It can be 180 degrees out and do that.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Mar 16, 2010, 7:46 PM
Post #4 of 8
(5240 views)
|
|
Re: vibration after timing belt changed
|
Sign In
|
|
HT hit this one on the head. The balance shaft is 180 out. They should know this but there is a plug half way down the block, line everything up remove the plug and insert a drill bit in the hole, if it can't be inserted at least 3", the shaft is 180 out.
I'm guessing your old belt broke, this usually doesn't happen on maintance replacements........
|
|
| |
|
|
rs2001
New User
Mar 16, 2010, 8:29 PM
Post #5 of 8
(5236 views)
|
|
Re: vibration after timing belt changed
|
Sign In
|
|
thanks for the replies ill take it in tomorrow.By the way the old belt didnt break i guess they just missed it
|
|
| |
|
|
rs2001
New User
Mar 17, 2010, 6:39 PM
Post #6 of 8
(5219 views)
|
|
Re: vibration after timing belt changed
|
Sign In
|
|
is it possiable that oil pump sprocket to be 180 out to.do the oil pump sprocket and silent shaft have different plugs to check if its out of time and is the plug a bolt or a rubber plug i cant seem to find it
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Mar 17, 2010, 9:31 PM
Post #7 of 8
(5218 views)
|
|
Re: vibration after timing belt changed
|
Sign In
|
|
The counter balance shaft is run off the oil pump sprocket. This view may help.
When I get one with a broken belt I just spin the gear hard, it always winds up with the weight on the bottom. You can even rotate it around to line the mark up again and you can feel the weight on the top wanting to roll over, which would be off. Using the drill bit method is 100% but if you've done a few spinning the gear works fine an is faster.....
If you want to use the plug method, just follow the balance shaft down the side of the block, it's about half way down, it always seems to be a PITA to get to.....thus the spin method is perferred....
|
|
| |
|
|
autorepair123
New User
Mar 19, 2010, 3:01 AM
Post #8 of 8
(5209 views)
|
|
Re: vibration after timing belt changed
|
Sign In
|
|
Just go to your mechanic and lrt them check your belt. Sometimes it is hard to get the tyming of your belt even it is new.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
