Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









06 mazda trbute hesitates and stalls


Search for (search options)
 



mik05
User

Sep 2, 2012, 6:15 AM

Post #1 of 4 (2035 views)
06 mazda trbute hesitates and stalls Sign In

We have a 06 Mazda tribute that sometimes hesitates when starting up hills. The motor revs up but it takes it a second to actually take off. The transfer case went out a couple years ago and we has a new one installed we always keep a good check all fluids and none of them leak so?? It also has a history is stalling while driving. Once if comes to a complete stop if will start rite back up with no problems. We have had this car since new and took it to the dealer and they say can't find anything


Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Sep 2, 2012, 7:47 AM

Post #2 of 4 (2006 views)
Re: 06 mazda trbute hesitates and stalls Sign In

Which engine?

Does it stall as your coming to a stop? Has it ever stalled while putting it into drive or reverse?

The engine revving while starting up a hill sounds like the transaxle is slipping. Could be the fluid level is low causing the pump inlet to be uncovered.





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.


mik05
User

Sep 2, 2012, 7:58 AM

Post #3 of 4 (2001 views)
Re: 06 mazda trbute hesitates and stalls Sign In

It has the dohc 24 valve v6. It only stalls sometimes but its only when driving about 55 or so never when just sitting still or putting in drive or reverse


Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Sep 2, 2012, 8:09 AM

Post #4 of 4 (1998 views)
Re: 06 mazda trbute hesitates and stalls Sign In

If the engine controller isn't setting any codes and the stalling is intermittent, those are the worst problems for any technician to figure out. Sometimes a glitch can occur for only a few milliseconds, which means the tech has to be at the right place at the right time when the problem occurs.

The only advice I have for something like that is to take note of all the conditions around you and what exactly was going on. You already know it seems to be speed related. The trick is being able to duplicate the conditions when the problem showed up.

If you can duplicate a set of conditions to make the problem occur, the technician will have the tiger by the tail and should be able to pinpoint the source.





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.

(This post was edited by Discretesignals on Sep 2, 2012, 8:10 AM)






 
 
 






Search for (options) Privacy Sitemap