Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









1994 GMC Jimmy wiper problem


Search for (search options)
 



Steve
New User

Mar 21, 2005, 8:47 AM

Post #1 of 5 (4381 views)
1994 GMC Jimmy wiper problem Sign In

I am trying to get an inspection sticker and my wipers stopped working. The blinker and high beam works, but no washer or wiper. Fuse is good. I had the dash apart to replace the heater core. Is it possible that something got unplugged? Any suggestions would be greatly appreciated.
Thanks, Steve



Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Mar 21, 2005, 9:31 AM

Post #2 of 5 (4377 views)
Re: 1994 GMC Jimmy wiper problem Sign In

I had one do that on a 96 Suburban and I played with the connection at the motor and they would work a couple weeks and then do it again. I finally just put in a new motor and that was the end of it and later (Mom's car) she was notified that it was a major recall for some circuit in the motor and they did reimburser her for the job over a year later.

Have you VIN# and call or go to your local dealer about this. In general if it's covered it should have expired over the time as safety (this is!) items stay covered.

Hope it's a freebe for you, Good luck,



Steve
New User

Mar 21, 2005, 11:49 AM

Post #3 of 5 (4373 views)
Re: 1994 GMC Jimmy wiper problem Sign In

Thank you Tom,
I checked the GMC recalls and my truck was not there. Is there any connections under the dash that could have been disconnected while I was replacing the heater core? Where would I find the wiper motor?
Thank you, Steve


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Mar 21, 2005, 3:30 PM

Post #4 of 5 (4369 views)
Re: 1994 GMC Jimmy wiper problem Sign In

I almost certain the motor is visable on firewall under you hood near brake booster. It has a connector with tons or wires there and you need to pull out a nylon lock to remove and inspect it. Or just wiggle it with the wipers on and see if it changes. You can also whack the round part of the motor with a reasonable tap from a hammer while it is on and see if it starts up. If so the motor is almost always bad. Also check that the motor itself has ground. You can do that with alligator jumper wires to body of motor - not just the mounting bolts. Some use a funny strap to ground motor to firewall that fails. Clean connecions or make a new one if the ground seems to be the problem. Good luck,



harleyguy
User

Sep 30, 2005, 4:41 AM

Post #5 of 5 (3672 views)
Re: 1994 GMC Jimmy wiper problem Sign In


In Reply To
You can also whack the round part of the motor with a reasonable tap from a hammer while it is on and see if it starts up.

Percussive Maintenance. That's my favorite. Sly Love reading your posts Tom. Keep up the good work.






 
 
 






Search for (options) Privacy Sitemap