Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
with_replies.gif image   1989 toyota pickup 3.0 crank no start
I have a 1989 toyota pickup 3.0 crank no...

with_replies.gif image   Strut spring orientation and strut mount tension nut
2017 Nissan rogue awd 2.5 L Put in Monro...

with_replies.gif image   Transmission stuck in part, I have tried everything
So I'm working on my elderly fathers 201...

with_replies.gif image   2017 dodge journey LED headlights on/off randomly
Year of vehicle 2017 Make of vehicle dod...

with_replies.gif image   Kia Soul starter replacement issues!
Okay so my car is a 2010 Kia soul 2.0 en...

hot_with_replies.gif image   Please Help - Knock sound & engine fail
Hi all, Hoping to get some insight and ...

with_replies.gif image   multiple warning lights
2013 GMC Terrain 130,000 miles 4 cylinde...

with_replies.gif image   03 alero no low speed blower
Good day everyone, I have a 2003 Olds a...

with_replies.gif image   04 Chevy 2500hd tail light issues
Help!!! I have changed my combo switch...

with_replies.gif image   1999 Grand Caravan Sport not starting.
Hi. I'm new here. I hope someone can hel...




1995 Geo Prism - failure to start

Search for (search options)
First page Previous page 1 2 Next page Last page  View All



Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

May 11, 2014, 1:11 PM

Post #26 of 28 (1352 views)
  post locked   Re: 1995 Geo Prism - failure to start  
Quote
I think I'm going to gamble and not replace that right now as it seems like a job that could easily go wrong for someone like me.
Just want to let you know that if that belt breaks before you get to change it, things will go a lot worse, to the extent of a new engine.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



robertsfd2002
User

May 11, 2014, 2:30 PM

Post #27 of 28 (1343 views)
  post locked   Re: 1995 Geo Prism - failure to start  
Thank you for watching out for me. I do know this. I'd have to admit that before all this I didn't know what an interference engine meant, but am aware now of the risk I'm taking. You'd have to see this car to appreciate my decision, and possibly even agree (given that if I were to try the repair I'd likely end up having to tow it in to fix what I did and finish the repair); it's 18+ years old, beat up a bit, awful color, radio not working, wife/kids embarrassed to be seen in it, etc. But she was my first purchased new car...I just want to be with her until she dies, even if it is a little prematurely due to neglect. Honestly, every dollar I spend on her really aggravates the wife.


Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

May 11, 2014, 2:56 PM

Post #28 of 28 (1341 views)
  post locked   Re: 1995 Geo Prism - failure to start  
Glad to read you got your vehicle running again. There are two sides to a coil or transformer: the primary winding and secondary winding. If either side goes bad, you will have spark output issues.

Coil windings that have good resistance specs doesn't necessary mean the coil is good overall because you are checking it in a static state. Your coil may check good with your ohm meter, but fail when it is operating under different conditions.

Not to be a nit picker, but you really need to consider getting that belt changed soon. The recommendation to change the timing belt is 90,000 miles or 72 months or which ever comes first. Your engine is an interference engine which means if the belt breaks, it will bend valves. If it bends valves, you will have to pull the cylinder head and send it to the machine shop for a valve job repair. That gets really expensive and time consuming.

Thanks for the follow up Smile Closing this thread as engine no start problem has been resolved. Can be opened upon request by the original poster.

edit: At the time I was writing this reply i didn't see the previous posts. Wife is jealous of the car....LOL





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.

(This post was edited by Discretesignals on May 11, 2014, 3:03 PM)





First page Previous page 1 2 Next page Last page  View All
 
 






Search for (options) Privacy Sitemap