|
|
|
1995 ford ranger will not start
|
|
|
| |
|
|
jon48ok
Novice
Jul 5, 2009, 9:43 AM
Post #1 of 11
(8304 views)
|
|
1995 ford ranger will not start
|
Sign In
|
|
1995 Ford Ranger xt 4 clyn 150,237 I changed out the dash engine light bulb and tried to start my ford, however when I put the clutch in and try to start it up, I can here the selonoid put the engine will not turn over. Help..
Thank John
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 5, 2009, 11:09 AM
Post #3 of 11
(8291 views)
|
|
Re: 1995 ford ranger will not start
|
Sign In
|
|
Start out testing for power arriving at the small trigger wire at the starter solenoid while the key is held in "start" position. If you have power there then you are looking at a starter.solenoid problem. If not, we have to test the rest of the circuit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
jon48ok
Novice
Jul 5, 2009, 11:39 AM
Post #4 of 11
(8281 views)
|
|
Re: 1995 ford ranger will not start
|
Sign In
|
|
Yes the dash lights turn on and I hear the selanoid when trying to start the engine
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Jul 5, 2009, 11:41 AM
Post #5 of 11
(8280 views)
|
|
Re: 1995 ford ranger will not start
|
Sign In
|
|
2 basic things I would probably take a look at would be 1st, try to jump it, you might of left something on while the dash was out & killed the batt or look at the clutch switch, you might of knocked the connector off & that's not the starter solenoid you hear...
If that checks out then start out in the direction Hammer has pointed you.......
|
|
| |
|
|
jon48ok
Novice
Jul 5, 2009, 11:42 AM
Post #6 of 11
(8280 views)
|
|
Re: 1995 ford ranger will not start
|
Sign In
|
|
Thank you, yes I hear the starter selanoid when trying to start the engine,
|
|
| |
|
|
jon48ok
Novice
Jul 5, 2009, 11:44 AM
Post #7 of 11
(8278 views)
|
|
Re: 1995 ford ranger will not start
|
Sign In
|
|
where is the clutch switch located?
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Jul 5, 2009, 11:48 AM
Post #8 of 11
(8276 views)
|
|
Re: 1995 ford ranger will not start
|
Sign In
|
|
It's on the clutch pedal....It's a safety so the engine won't crank unless the pedal is depressed....but if you are sure you are hearing the starter, then that isn't the problem
Also if jumping did no good, get under the truck & rap on the starter with a hammer while someone trys to crank it to see if the starter has a dead spot......Just make sure park brk is on, wheels blocked & clutch is pushed all the way in.....basically all the normal safety stuff. It would suck to get run over by your own truck....
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 5, 2009, 11:51 AM
Post #9 of 11
(8273 views)
|
|
Re: 1995 ford ranger will not start
|
Sign In
|
|
If the solenoid is engaging for sure, then the issue can only be a poor cable connection or a bad starter.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
jon48ok
Novice
Jul 5, 2009, 11:54 AM
Post #10 of 11
(8270 views)
|
|
Re: 1995 ford ranger will not start
|
Sign In
|
|
Where is the clutch switch located?
Thank you for your reply.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
