Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
with_replies.gif image   1989 toyota pickup 3.0 crank no start
I have a 1989 toyota pickup 3.0 crank no...

with_replies.gif image   Strut spring orientation and strut mount tension nut
2017 Nissan rogue awd 2.5 L Put in Monro...

with_replies.gif image   Transmission stuck in part, I have tried everything
So I'm working on my elderly fathers 201...

with_replies.gif image   2017 dodge journey LED headlights on/off randomly
Year of vehicle 2017 Make of vehicle dod...

with_replies.gif image   Kia Soul starter replacement issues!
Okay so my car is a 2010 Kia soul 2.0 en...

hot_with_replies.gif image   Please Help - Knock sound & engine fail
Hi all, Hoping to get some insight and ...

with_replies.gif image   multiple warning lights
2013 GMC Terrain 130,000 miles 4 cylinde...

with_replies.gif image   03 alero no low speed blower
Good day everyone, I have a 2003 Olds a...

with_replies.gif image   04 Chevy 2500hd tail light issues
Help!!! I have changed my combo switch...

with_replies.gif image   1999 Grand Caravan Sport not starting.
Hi. I'm new here. I hope someone can hel...




93 cavalier starter removal

Search for (search options)
 



bradldv
Novice

Oct 16, 2008, 12:59 PM

Post #1 of 4 (2849 views)
93 cavalier starter removal Sign In
93 cavalier starter removal ? Any advice would help.I seem not to be able to get the bolt buy the exuast pipe.Can you take the plastic part off under the starter?


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Oct 19, 2008, 4:34 AM

Post #2 of 4 (2829 views)
Re: 93 cavalier starter removal Sign In
What engine and trans does this have? There are some that require removing exhaust parts or tilting engine,

T



bradldv
Novice

Oct 19, 2008, 5:27 AM

Post #3 of 4 (2823 views)
Re: 93 cavalier starter removal Sign In
It has the 2.2 4cyl.I don't know about the trans.It is the RS cavalier.


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Oct 19, 2008, 5:54 AM

Post #4 of 4 (2822 views)
Re: 93 cavalier starter removal Sign In
I meant automatic or standard shift transmission. Here's what it says on it below. NBD noted except a brace if a manual transaxle.

********************

*2.2L (VIN 4 & G) Engines

See Figure 5
  1. Disconnect the negative battery cable at the battery.
  2. Raise and safely support the vehicle.
  3. For vehicles equipped with a manual transaxle, remove the bending brace from around the starter.
  4. Unfasten the starter motor-to-engine bolts, then carefully lower the starter. Remember, the leads are still attached to the starter.
  5. Remove the nuts/bolts that hold the starter bracket to the starter and engine.
  6. Detach the electrical leads, then remove the starter from the vehicle.
Fig. 5: Removal and installation of the starter - 2.2L engine shown, 2.0L (VIN 1) similar
To install:
  1. Raise the starter into position, then connect the electrical leads. Tighten the "S" terminal to 22 inch lbs. (2.5 Nm) and the battery terminal to 106 inch lbs. (12 Nm).
  2. Secure the starter using the retaining bolts. Tighten to 32 ft. lbs. (43 Nm). Install the nuts/bolts that hold the start bracket to the starter and the engine. Tighten the bracket-to-engine bolt to 24 ft. lbs. (32 Nm) and the brace-to-starter motor nut to 106 inch lbs. (12 Nm).
  3. If equipped with a manual transaxle, install the bending brace.
  4. Carefully lower the vehicle, then connect the negative battery cable.

***********

T






 
 
 






Search for (options) Privacy Sitemap