|
|
|
94 toyota 22re bucking and stalling
|
|
|
| |
|
|
chas
User
Jul 17, 2014, 6:09 PM
Post #1 of 5
(3727 views)
|
|
94 toyota 22re bucking and stalling
|
Sign In
|
|
Got a little problem. 94 toyota p/up 22re 5spd OB1 computer. Recent IAC(idle air control)service on the throttle body, new fuel filter, tuneup blah, blah. Starts and idles good cold. Bucks and stalls cold when i take off driving down the street with speedometer jumping around. Leave the neighborhood driving at 35mph, starts bucking, speedo jumping around from 35 as high as 70mph. Pull over and restart and drive. Repeats bucking and stalling with speedometer jumping around until it warms a little. Ok when warmed up. Might buck a little sometimes with speedo jumping around warm. Ran and idled fine after the mentioned in line 1. Now i have this problem. it just started acting up last week. Lets hear the suggestions.
|
|
| |
|
|
GC
User
Jul 18, 2014, 6:25 AM
Post #2 of 5
(3698 views)
|
|
Re: 94 toyota 22re bucking and stalling
|
Sign In
|
|
Start off by verifying that the battery, alternator, and related wiring is in good condition. Make sure battery cable connections are clean and tight. Verify grounds are in good condition, clean and tight.
____________________________________________________
Willing to help, willing to learn... Rob
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jul 28, 2014, 11:45 AM
Post #4 of 5
(3636 views)
|
|
Re: 94 toyota 22re bucking and stalling
|
Sign In
|
|
Mastertech was the factory scan tool. If your really into fixing older Toyota, that was the tool of choice. You might be able to find it on Ebay, but your looking at thousands of dollars. Another thing is that a scan tool is worthless to someone that doesn't have an understanding of electronic fuel injection and/or the ability to decipher what the scan tool information is displaying.
The best thing for you is to jump TE1 to E1 in the diagnostic connector under the hood. When you turn the ignition on the check engine light will flash any stored trouble codes.
http://www.youtube.com/watch?v=lxks7yRV6Uw
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Jul 28, 2014, 11:49 AM)
|
|
| |
|
|
chas
User
Jul 28, 2014, 5:04 PM
Post #5 of 5
(3627 views)
|
|
Re: 94 toyota 22re bucking and stalling
|
Sign In
|
|
Mastertech was the factory scan tool. If your really into fixing older Toyota, that was the tool of choice. You might be able to find it on Ebay, but your looking at thousands of dollars. Another thing is that a scan tool is worthless to someone that doesn't have an understanding of electronic fuel injection and/or the ability to decipher what the scan tool information is displaying. The best thing for you is to jump TE1 to E1 in the diagnostic connector under the hood. When you turn the ignition on the check engine light will flash any stored trouble codes. http://www.youtube.com/watch?v=lxks7yRV6Uw *************************************************** yeah , i know..... the pre 96 computers were a real problem and diffucult to work with when there is a problem. just looking for more opinions. its not that im into old toyos. runs ok, not burning, leaking or smoking. no blue smoke on a cold start. .....not giving me a lot of problems....runs and drives staight. .....it can be fixed.
(This post was edited by chas on Jul 28, 2014, 5:24 PM)
|
|
| |
|
| | |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
