95 sable water pump - Car Troubleshooting


	Auto Repair Home	SEARCH POSTS	WHO'S ONLINE	LOG IN

Automotive Repair

Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:
  Login
  Sign up here!

Latest Forum Post

1989 toyota pickup 3.0 crank no start

I have a 1989 toyota pickup 3.0 crank no...

Strut spring orientation and strut mount tension nut

2017 Nissan rogue awd 2.5 L Put in Monro...

Transmission stuck in part, I have tried everything

So I'm working on my elderly fathers 201...

2017 dodge journey LED headlights on/off randomly

Year of vehicle 2017 Make of vehicle dod...

Kia Soul starter replacement issues!

Okay so my car is a 2010 Kia soul 2.0 en...

Please Help - Knock sound & engine fail

Hi all, Hoping to get some insight and ...

multiple warning lights

2013 GMC Terrain 130,000 miles 4 cylinde...

03 alero no low speed blower

Good day everyone, I have a 2003 Olds a...

04 Chevy 2500hd tail light issues

Help!!! I have changed my combo switch...

1999 Grand Caravan Sport not starting.

Hi. I'm new here. I hope someone can hel...

95 sable water pump

Sign up here!

Search for (search options)

Auto Repair Home>> Automotive Repair>> Car Troubleshooting

Guest
Anonymous Poster
flipit316@aol.com

Apr 6, 2008, 4:02 PM

Post #1 of 5 (1415 views)

95 sable water pump	Sign In

Im doing a waterpump on a 95 sable whith the 3.8. I have it completly loose but it wont clear the studs because the body is in the way and the studs are to long to take out. Has anyone done one of these and know what the trick is? Thanks Phill

Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Apr 6, 2008, 4:13 PM

Post #2 of 5 (1411 views)

Re: 95 sable water pump	Sign In

Remove the four water pump pulley bolts. The pulley will remain loose on the hub because there is insufficient room between the inner fender and the water pump, restricting removal from the vehicle.
Remove the water pump-to-engine retaining bolts, then lift the water pump and pulley assembly out of the vehicle.

I cheated and copied that! It can take two wrenches and tricks to remove pulley bolts from the pump - sometimes putting the belt back on will hold it tight enough to remove or loosen enough to get them out. Hope that helps and was/is where you are stuck,

T

Guest
Anonymous Poster

Apr 6, 2008, 4:30 PM

Post #3 of 5 (1410 views)

Re: 95 sable water pump	Sign In

Taking the pulley off was the easy part (which I was amazed by) probably because the pump was compleatly seazed... The 4 bolts came out but in addition to that there are 4 studs and the pump wont clear the studs when lifting it out.

Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Apr 6, 2008, 4:41 PM

Post #4 of 5 (1408 views)

Re: 95 sable water pump	Sign In

Ok: Studs in timing cover may come out if you have enough threads to put two nuts on them tight to each other and turn the inside one to remove the stud. Dont break off studs at all costs! I may be confused as to where you are stuck and would have thought the pump used bolts into timing cover but if it's studs so be it. If they must be trashed to get them out still dont break them off and keep them to match up as they could be different thread at opposite ends. Those are stock type for fan clutches not used in this engine. Possibly 5/16 course one end and fine the other - not sure........

T

Guest
Anonymous Poster

Apr 6, 2008, 5:10 PM

Post #5 of 5 (1407 views)

Re: 95 sable water pump	Sign In

yah that seems like the only solution, I think I should be able to get them in and it should just clear. Thanks for all the help if that dosent work you will probley be hearing from me again.

Search for (options) Privacy Sitemap