Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









99 grand caravan


Search for (search options)
 



tcracing59
New User

May 3, 2006, 5:24 PM

Post #1 of 6 (3093 views)
99 grand caravan Sign In

Hello everyone

can anyone tell me how to get the rear brake drum off a 99 grand caravan.

thank you, Ken


DanD
Veteran / Moderator
DanD profile image

May 3, 2006, 6:51 PM

Post #2 of 6 (3089 views)
Re: 99 grand caravan Sign In

By rights it should just come off after the wheel has been removed but a lot of times there is a rust ridge that builds up and stops the drum from coming off without backing off the brake self adjuster.
Backing off the adjuster is just as easy as tying your shoes but also just as hard to explain to someone that has never had to do it.
Dan

Canadian "EH"






carjunky
Enthusiast

May 3, 2006, 7:58 PM

Post #3 of 6 (3085 views)
Re: 99 grand caravan Sign In

You can bang the drum if you think its rusty with a rubber hammer to try and loosen it.... as well, if what dan suggested doesn't work.


tcracing59
New User

May 3, 2006, 8:18 PM

Post #4 of 6 (3074 views)
Re: 99 grand caravan Sign In

So the drum is not held on by any pins or clips or bolts like I have been told by 2 different people.


DanD
Veteran / Moderator
DanD profile image

May 4, 2006, 3:52 AM

Post #5 of 6 (3069 views)
Re: 99 grand caravan Sign In

The older Caravan’s and Voyager’s the drums and the hubs were an assembly where you would have to remove the tapered bearing to remove the drum. I not sure what year they changed to a sealed bearing hub assembly but now they are two separate pieces.
Dan.

Canadian "EH"






Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

May 4, 2006, 7:49 AM

Post #6 of 6 (3067 views)
Re: 99 grand caravan Sign In

Can't say for every year but most "American" cars the drum just pulls off. Sometime they are a real pest. Use a rust buster and start with a heavy rubber hammer at the outer edges and a metal file can help. If you break hardware getting it off the parts are cheap and sold in kits.

Put a smear of grease on that hub and you'll never fight with it again.

Can't remember (for your car) - but many OEM drums used a clip like push nut that you can just break off and forget. TMK they were used so the dang drum didn't fall off when they made the vehicle.

If you see a couple small threaded holes they are for pulling the drum but I haven't seen that on a Chrystler yet. They should be 8mm bolts if you find that which will pull off drum. T







 
 
 






Search for (options) Privacy Sitemap