Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Azera parking brake

Search for (search options)
 



dorseyh
New User

Sep 6, 2011, 11:42 AM

Post #1 of 2 (5899 views)
Azera parking brake Sign In
2009 Hyundai Azera. How do I adjust the parking brake?


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Sep 6, 2011, 11:50 AM

Post #2 of 2 (5893 views)
Re: Azera parking brake Sign In
             
Adjustment

Adjustment Of Rear Brake shoe Clearance
  1. Raise the front of the vehicle, and make sure it is securely supported.
  2. Remove the rear wheel and tire from the rear hub.
  3. After removing the plug from the disk, rotate the toothed wheel by a screw driver until the disk is not moving, and then return it by 5 notches.



Adjustment Procedure Of Dih Foot Parking Brake
  1. Adjust the adjusting nut(A) so that parking pedal stroke is to be 7 Notch when operating effort is 294 N(30 kgf, 66 lb) after full stroke operation of parking pedal over 3 times for setting parking wire.



CAUTION:
  1. The parking brake adjustment must be carried out after adjusting the rear shoe.
  2. After adjusting parking brake, notice following matter;
1) Must be free from clearance between adjusting nut and pin. 2) Check securely that the brake is not dragging
Bed-In Procedure For Dih Foot Parking Brake
  1. While operating the parking brake pedal for 196 N(20 kgf, 44 lb) effort, drive the vehicle 500 meters (0.31 miles) at the speed of 60 kph (37.3 mph).
  2. Repeat the above procedure more than two times.
  3. Must be held on at 30% uphill.

CAUTION:
After adjusting parking brake, notice following matter;
  1. Must be free from troubles when the parking pedal is operated at 1 kN(100 kgf, 220 lb).
  2. Check that all parts move smoothly.
  3. The parking brake indicator lamp must be on after the parking pedal is worked and must be off after the pedal is released.




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



(This post was edited by Hammer Time on Sep 6, 2011, 11:51 AM)





 
 
 






Search for (options) Privacy Sitemap