|
|
|
Buick Skylark Crankshaft Position Sensor
|
|
|
| |
|
|
Rellsun
Anonymous Poster
Pyroboy896@aol.com
Jun 15, 2009, 2:38 PM
Post #1 of 9
(3845 views)
|
|
Buick Skylark Crankshaft Position Sensor
|
Sign In
|
|
So i have a 1993 Buick Skylark v6 3.3l and i am not getting any spark. so i changed out the ignition control module and the coil packs and am still getting no spark. Which leads me to believe its the CPS so how do i go about replacing the sensor. thanks
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jun 15, 2009, 3:08 PM
Post #2 of 9
(3834 views)
|
|
Re: Buick Skylark Crankshaft Position Sensor
|
Sign In
|
|
That Crank Sensor requires a $600 tool to install so instead of throwing parts at it why don't you spend $5 for a noid light and check for injector pulse. If you have injector pulse, you can eliminate the crank sensor.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Loren Champlain Sr
Veteran
/ Moderator
Jun 15, 2009, 3:08 PM
Post #3 of 9
(3831 views)
|
|
Re: Buick Skylark Crankshaft Position Sensor
|
Sign In
|
|
The crank sensor is mounted just above and a little to the side of the harmonic balancer. Sounds like you are on the right track.
Loren
SW Washington
|
|
| |
|
|
rellsun
Anonymous Poster
Jun 17, 2009, 3:17 PM
Post #4 of 9
(3812 views)
|
|
Re: Buick Skylark Crankshaft Position Sensor
|
Sign In
|
|
sorry buddy but i already did check for fuel injector pulse and i am not getting ANY so calm down.
|
|
| |
|
|
rellsun
Anonymous Poster
Jun 17, 2009, 3:18 PM
Post #5 of 9
(3811 views)
|
|
Re: Buick Skylark Crankshaft Position Sensor
|
Sign In
|
|
oh and what is this $600 tool your talking about because i didnt need it when i changed the sensor
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Jun 17, 2009, 3:38 PM
Post #6 of 9
(3807 views)
|
|
Re: Buick Skylark Crankshaft Position Sensor
|
Sign In
|
|
You should take his posts for what they are..... The guy is trying to help you & save you some $$$$$$.
The tool you are inquiring about was/is made by Kent Moore I believe & it's sole purpose in life was to set the air gap on the crank sensor because it's a blind fit & it's around $600. Recently some companys started making sensors with no setting that bolt on. Sounds like you got lucky & got one of those because there are still some adjustable ones out there.
The man has a lot of knowledge, if ya work with him, he'll help ya get your ride going.... If you want to argue with him......well...........
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jun 17, 2009, 9:31 PM
Post #7 of 9
(3801 views)
|
|
Re: Buick Skylark Crankshaft Position Sensor
|
Sign In
|
|
Thanks Sidom
I just hope he has solved his problem before getting so rude with the people trying to help him. I doubt he will see much help from here on. .
.
.
.
.
.
.
.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on Jun 17, 2009, 9:31 PM)
|
|
| |
|
|
Guest
Anonymous Poster
Jun 18, 2009, 12:53 AM
Post #8 of 9
(3791 views)
|
|
Re: Buick Skylark Crankshaft Position Sensor
|
Sign In
|
|
sorry if i came off rude but i was just wandering what tool was needed because the sensor just bolted on. and yes it did fix the problem thank you. and again sorry
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jun 20, 2009, 1:47 AM
Post #9 of 9
(3767 views)
|
|
Re: Buick Skylark Crankshaft Position Sensor
|
Sign In
|
|
rellsun ;
Glad you are all fixed up. The apology worked wonders as I was about to go postal on YOU. Hammer and Loren probably forgot yesterday more than I ever knew so you had the best of the web for free at your beck and call.
All be calm - this site is free and not begging which speaks loudly for integrity IMO!
TomG
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
