|
|
|
CHRYSLER TOWN AND COUNTRY-PLEASE HELP QUICKLY!!!
|
|
|
| |
|
|
szamocka
New User
Nov 18, 2011, 7:27 AM
Post #1 of 9
(2485 views)
|
|
CHRYSLER TOWN AND COUNTRY-PLEASE HELP QUICKLY!!!
|
Sign In
|
|
HI! I HAVE A 1998 CHRYSLER TOWN AND COUNTRY. I JUST GOT DONE CHANGING THE SPARK PLUGS IN MY 98 CHRYSLER MINI VAN,3.8 ,I HAD TO TAKE OFF THE INTAKE MANIFOLDS ETC! IT'S ALL BACK NOW BUT IT IS IN FAST IDOL! OR STUCK IN FULL THROTOL!!?? WHAT IS GOIN ON? i rechecked everithing !!" PLEASE HELP!!!
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Nov 18, 2011, 7:43 AM
Post #2 of 9
(2469 views)
|
|
Re: CHRYSLER TOWN AND COUNTRY-PLEASE HELP QUICKLY!!!
|
Sign In
|
|
Did you replace manifold gaskets? If no pinched wiring seems like a vacuum leak so far or maybe if torquing manifold(s) etc., broke/cracked something??
T
|
|
| |
|
|
szamocka
New User
Nov 18, 2011, 8:50 AM
Post #3 of 9
(2455 views)
|
|
Re: CHRYSLER TOWN AND COUNTRY-PLEASE HELP QUICKLY!!!
|
Sign In
|
|
HI! AND THANKS FOR RESPONDING! I HAD RETITENED ALL THE BOLTS AND IT HELPED! BUT I THINK IT STILL IDOLS TO FAST! ITS OK IN D, BUT IN PARK IT IDOLS OVER 1200 RPM! AND AS IT WORMS UP EVEN FASTER! I PUT NEW GASKETS AND DID NOT USED ANY SILICON,BUT WAS ONE IN THE PACKAGE! I WAS TOLD NOT TO USE IT?? ON THE INTAKE!? IS THERE WAY TO SET THE IDOL SPEED LOWER? SINCE I PUT NEW WIRES AND PLUGS IT RUNS BETTER! IT WAS NEVER CHANGED! WHAT IS NORMAL?ALSO I DID NOT WANT TO TORQUET TO MUCH!
|
|
| |
|
|
autotecha
User
Nov 18, 2011, 9:22 AM
Post #4 of 9
(2449 views)
|
|
Re: CHRYSLER TOWN AND COUNTRY-PLEASE HELP QUICKLY!!!
|
Sign In
|
|
X2 Like he said it sounds like a vaccuum leak. Do you have a torque wrench to torque it down?
*******ASE Master Automotive Technician, L-1, L-2 and a lot of wallpaper too :-)******
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Nov 18, 2011, 9:27 AM
Post #5 of 9
(2449 views)
|
|
Re: CHRYSLER TOWN AND COUNTRY-PLEASE HELP QUICKLY!!!
|
Sign In
|
|
Many parts of things especially engine you need to tight things in order by specified torque. If not done that way can be trouble especially on engines using alloy/aluminum parts!
The manifold gaskets may or may not be interchangeable side to side/front and rear. Plain don't know for this car but if so problems are near certain. New gaskets should have said or included any sealer/silicone if needed,
T
|
|
| |
|
|
autotecha
User
Nov 18, 2011, 12:51 PM
Post #6 of 9
(2433 views)
|
|
Re: CHRYSLER TOWN AND COUNTRY-PLEASE HELP QUICKLY!!!
|
Sign In
|
|
TOM, I'm glad you said sequence ( I meant to say that with using a torque wrench....)
*******ASE Master Automotive Technician, L-1, L-2 and a lot of wallpaper too :-)******
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Nov 18, 2011, 4:19 PM
Post #7 of 9
(2422 views)
|
|
Re: CHRYSLER TOWN AND COUNTRY-PLEASE HELP QUICKLY!!!
|
Sign In
|
|
Thanks for clarifying. In sequence using torque wrench is much better than saying in order. Old all cast iron you could get away with murder but sure wouldn't trust the aluminum/alloys - engine, pumps, wheels and all!
T
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 18, 2011, 6:03 PM
Post #8 of 9
(2411 views)
|
|
Re: CHRYSLER TOWN AND COUNTRY-PLEASE HELP QUICKLY!!!
|
Sign In
|
|
Don't use silicone on the upper intake plenum. Silicone will kill an O2 sensor faster than you can say, "Opps did I do that?" Only time you use gasket maker, which is O2 sensor safe, on one of those is when you are doing lower intake gaskets. You use a little bit of gasket maker on the china walls in the corners.
Don't adjust the throttle cam stop to lower idle speed. If you have a high idle, you have done something wrong and you need to figure it out instead of compromising for it by changing something that isn't intended to be messed with.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Nov 18, 2011, 6:04 PM)
|
|
| |
|
|
samg.
User
Nov 19, 2011, 11:49 AM
Post #9 of 9
(2393 views)
|
|
Re: CHRYSLER TOWN AND COUNTRY-PLEASE HELP QUICKLY!!!
|
Sign In
|
|
Did you tweak your throttle cable?
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
