Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Car wont turn off


Search for (search options)
 



sirloganmoore
New User

Dec 30, 2008, 10:34 PM

Post #1 of 5 (2904 views)
Car wont turn off Sign In

Hello all

I have a 1992 Mercury Grand Marquees the key broke off in the ignition not to long ago but we wear able to start and turn off the car with out any problems. but tonight i got home and boom it wont turn off. the ignition will just spin counter clockwise, Clock wise however it continues to try to start...... any ideas would be very helpfull

Thanks
Logan


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Dec 30, 2008, 11:41 PM

Post #2 of 5 (2901 views)
Re: Car wont turn off Sign In

?? My guess is you'll need to remove the lock cylinder to see just what's damaged more - the replacable cylinder with key or the housing it's in. I don't think this year has an airbag and if it does you may want to send this problem to a lock shop. Might need the housing and be easier and cheaper to change the whole column with a good used one.

Ford products just plain have a couple decades of issues with ign lock cylinder and switches!

T



sirloganmoore
New User

Dec 31, 2008, 12:07 AM

Post #3 of 5 (2898 views)
Re: Car wont turn off Sign In

well i pulled the fuel pump fuse to kill the motor and disconnected the neg batt cable to kill the electrical me and that car had a battle but i won... well looks like i am going to have to reserch a wile to get the ign lock cylinder, after a little recerch i found just as you said, ford had a problem with this.... grrrrrrrUnsure
ohh wel i guess it could be worce. thanks for the help and if anyone asks this just tell em pull the fule pump fuse..... 2nd to the bottom in the middle of the fuse box under the hood......


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Dec 31, 2008, 12:28 AM

Post #4 of 5 (2892 views)
Re: Car wont turn off Sign In

92 is a funky year for Grand Marquis and Crown Vics. I just can't recall if the column is more like older Ford products or the first of the newer ones?

Does this have an airbag? I think 93 all had driver's side air bags - not certain though. I'd be VERY careful if it has an airbag with problems going on there right now!

If more like older full size Fords much of the column will shed cheapo plastic covers without removing the steering wheel and you might see what's wrong. The lock cylinder pushes on a rod to the ign switch further down towards the brake pedal. Rod may be all screwed up and I've never seen one just turn way too far like you described.

The Ford issues were both the ign switch could get hot and caused a couple fires out of zillions of cars and there was a recall. Others the key would come out while ign was not fully off and drain batteries or the "chimes" would keep ringing like the key was still inserted when it was removed.

Wonder if the bonehead who designed all those still has a jobCrazy?

You said the key broke off. Was this car messed with some attempt to steal it or anything? Is the wheel tight or does it wobble a bit? I've had some loosen up and just a bunch of little 5/16th (same as 8mm) bolts needed retightening fixed it all from a gorrilla using the wheel as a chin up bar or something??

T



way2old
Veteran / Moderator
way2old profile image

Dec 31, 2008, 4:26 PM

Post #5 of 5 (2879 views)
Re: Car wont turn off Sign In

To remove your lock cylinder, place switch in run position. There is a small hole in the lower steering column cover. Insert a small screwdriver/punch in the hole to release the locking pin and pull the cylinder out of column. May be just be the tab on the back of the cylinder. Click here.



Being way2old is why I need help from younger minds






 
 
 






Search for (options) Privacy Sitemap