|
|
Guest
Anonymous Poster
Mrs.mag@xanadoo.com
Apr 10, 2009, 9:33 PM
Post #1 of 9
(3516 views)
|
Chevy Cavalier Repair
|
Sign In
|
|
I was told (by my mechanic) that my 2000 Chevy Cavalier (46,000 Miles) need a front steering rack & pinion repair. What can I expect to pay for this repair? (With realigned)(in Oklahoma)[email]
|
|
| |
|
|
Loren Champlain Sr
Veteran
/ Moderator
Apr 11, 2009, 9:56 AM
Post #2 of 9
(3507 views)
|
|
Re: Chevy Cavalier Repair
|
Sign In
|
|
Guest; First question would be, what's wrong with the rack? Leaking? Hard to turn one direction when cold?
For a price guess, we'll need to know what model Cavalier (there are three models), which engine (two possibilities), and type of transmission (standard or auto.)
A guess, without that information, would be $250-$350 for a reman. rack & pinion assy. and 2.3-3.5 hrs. labor.
Of course, prices across the country will vary.
Loren
SW Washington
|
|
| |
|
|
Guest
Anonymous Poster
mrs.mag@xanadoo.com
Apr 14, 2009, 9:39 PM
Post #3 of 9
(3495 views)
|
|
Re: Chevy Cavalier Repair
|
Sign In
|
|
Thank you very much Loren!
Model of my chevy cavalier: I don't know
Engine: 4 cylinder
Transmission: Auto
Problem: My mechanic said there is a lot of "play" in the steering wheel, and he told me to not take a long trip with the car untill its fixed. That scares me. I have only few miles on my chevy and take good care about it. The dealership (chevy) is lousy in this town and so I have to trust an inderpendent mechanic. It just sounded very high ( $ ) to me, and I don't know nothing about cars. His price: 672.00$
|
|
| |
|
|
flgmtech1
User
Apr 15, 2009, 4:22 AM
Post #4 of 9
(3489 views)
|
|
Re: Chevy Cavalier Repair
|
Sign In
|
|
Factory OEM Steering Gear 26068964 $792.32
Labor 2.4 Does not include set toe, Most shops charge 1.0 set toe
dependent on your shops labor fees, you times 2.4 times the labor rate as this is flat rate, then the alignment is a menu item so 49.95 or whatever the rate for their alignment would be added to the total of flat rate and the part.
If the total was around 650.00 parts and labor that is reasonable.
However, with that being said, play in the wheel can also be an issue with worn tie rod ends inner or outer or ball joints, I would have all of these inspected as well as any abnormal hub play at another shop to obtain a second opinion before investing your money in a repair that may not solve your problem. Also, if the rack is being replaced due to worn inner tie rod ends and yes they would be fixed by replacing the steering gear, they are much cheaper for you the consumer, to be replaced rather than the whole steering gear. The object is not to throw the baby out with the bath water, If your gear has no leaks no binding and the pre load is fine, then the issue must be isolated and repaired.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Apr 15, 2009, 4:53 AM
Post #5 of 9
(3486 views)
|
|
Re: Chevy Cavalier Repair
|
Sign In
|
|
Just to add:
Labor prices vary widely even within an area. Eastern MA can be right around $100/hr - overhead is nasty!
With this car only having 46,000 miles I'm wondering if the rack itself is at fault or could it be just tie rods ends? Still costs either way and it needs to be safe,
T
|
|
| |
|
|
opelfan
New User
Apr 15, 2009, 9:16 PM
Post #6 of 9
(3474 views)
|
|
Re: Chevy Cavalier Repair
|
Sign In
|
|
Thanks so much Loren,
I will get a second opinion and get it fixed ASAP
Thank you again - Mrs.maggie
|
|
| |
|
|
opelfan
New User
Apr 15, 2009, 9:19 PM
Post #7 of 9
(3473 views)
|
|
Re: Chevy Cavalier Repair
|
Sign In
|
|
To flgmtech1,
thank you so much for your advise, I will get a second opinion, and get it fixed
|
|
| |
|
|
opelfan
New User
Apr 15, 2009, 9:21 PM
Post #8 of 9
(3472 views)
|
|
Re: Chevy Cavalier Repair
|
Sign In
|
|
Tom,
thanks to you too, I hope I get my car fixed soon!
|
|
| |
|
|
flgmtech1
User
Apr 16, 2009, 2:43 PM
Post #9 of 9
(3458 views)
|
|
Re: Chevy Cavalier Repair
|
Sign In
|
|
 You are quite welcome! That is what this forum is for!
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
