Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
with_replies.gif image   1989 toyota pickup 3.0 crank no start
I have a 1989 toyota pickup 3.0 crank no...

with_replies.gif image   Strut spring orientation and strut mount tension nut
2017 Nissan rogue awd 2.5 L Put in Monro...

with_replies.gif image   Transmission stuck in part, I have tried everything
So I'm working on my elderly fathers 201...

with_replies.gif image   2017 dodge journey LED headlights on/off randomly
Year of vehicle 2017 Make of vehicle dod...

with_replies.gif image   Kia Soul starter replacement issues!
Okay so my car is a 2010 Kia soul 2.0 en...

hot_with_replies.gif image   Please Help - Knock sound & engine fail
Hi all, Hoping to get some insight and ...

with_replies.gif image   multiple warning lights
2013 GMC Terrain 130,000 miles 4 cylinde...

with_replies.gif image   03 alero no low speed blower
Good day everyone, I have a 2003 Olds a...

with_replies.gif image   04 Chevy 2500hd tail light issues
Help!!! I have changed my combo switch...

with_replies.gif image   1999 Grand Caravan Sport not starting.
Hi. I'm new here. I hope someone can hel...




Emergency Brake Problems

Search for (search options)
 



Sleigh
Anonymous Poster

Jul 21, 2007, 1:37 PM

Post #1 of 4 (1636 views)
Emergency Brake Problems Sign In
Hi. I have a '94 Plymouth Acclaim and not too long ago I applied the emergency brake and when I came back to take it off it released but the light stays on. I checked the brake and it does release but the sensor just doesn't register that the brake has been removed and the light stays on. Does anybody have any suggestions on how to correct this?

Thanks.


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Jul 21, 2007, 3:13 PM

Post #2 of 4 (1631 views)
Re: Emergency Brake Problems Sign In
The cables are probably sticky from corrosion and it doesn't fully return far enough to shut the light off. Certainly check the brake fluid level and make that's proper. Most cars use the same light for that,

T



Sleigh
Anonymous Poster

Jul 21, 2007, 8:10 PM

Post #3 of 4 (1630 views)
Re: Emergency Brake Problems Sign In
The brake fluid was one of the first things I checked. And after I found out that the emergency brake was releasing, I went back into the car reached down and lifted up the pedal to engage the emergency brake and sure enough the light went out. Then i let go to see if it would stay and as soon as i let go of the pedal it came right back on.


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Jul 21, 2007, 11:47 PM

Post #4 of 4 (1628 views)
Re: Emergency Brake Problems Sign In
That's classic for sticking cables. They are basic but fussy if you do this yourself and get exact fit replacements. They are near impossible to just free up the old ones (can be just one bad) and have them stay working,

T






 
 
 






Search for (options) Privacy Sitemap