|
| | |
|
|
hdtramp
New User
May 21, 2012, 10:25 AM
Post #1 of 13
(2572 views)
|
I own a 1999 mercury sable with 148000 miles on it. I recently noticed a wobble in the front end when braking, thinking it was a warped rotor, I jacked up the front end and pulled the tires off. Neither rotor was warped. I started the car and put it in drive(I know, not really safe) to see how everything was looking. When I put on the brakes, the driver side assembly moved in quite a bit. I also noticed the engine twist which is why the driver side moved. Now I know the engine is rubber mounted, but the movement seems very excessive. The passenger side front suspension doesn't move. The tie rods seem good, both inner and outer, although the inner on on the drivers side has allittle play to it nothing excessive. Understandable with the amount of engine twisting that is going on. The CV joints seem ok. My question is: should the engine twist that much? Are the motor mounts bad, or am I over looking something here? I'm a recently dislocated worker who is somewhat mechanically inclined but thanks to outsourcing, on a budget. So any help would be appreciated. Thank you.
|
|
| |
|
|
hdtramp
New User
May 21, 2012, 1:11 PM
Post #3 of 13
(2521 views)
|
|
Re: Engine mounts?
|
Sign In
|
|
with a dial indicator
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 21, 2012, 2:05 PM
Post #4 of 13
(2512 views)
|
|
Re: Engine mounts?
|
Sign In
|
|
There isn't much else that could account for pulsation when braking.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
May 21, 2012, 3:22 PM
Post #5 of 13
(2502 views)
|
|
Re: Engine mounts?
|
Sign In
|
|
I could see it now. HT thought you were going to say you eyeballed it...LOL
If possible you need to have someone watch the engine mounts while the engine is brake torqued. The one that usually goes first is the one on the front near the radiator. Or you can get underneath and use a large pry bar to move the engine around to see if there are any mounts broken.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on May 21, 2012, 3:25 PM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 21, 2012, 3:33 PM
Post #8 of 13
(2482 views)
|
|
Re: Engine mounts?
|
Sign In
|
|
Yeah, I was addressing him.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
May 21, 2012, 3:40 PM
Post #9 of 13
(2474 views)
|
|
Re: Engine mounts?
|
Sign In
|
|
Oh? pardon me.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
hdtramp
New User
May 21, 2012, 6:43 PM
Post #10 of 13
(2456 views)
|
|
Re: Engine mounts?
|
Sign In
|
|
If you read the post I jacked it up and I noticed when I would brake the driverside front tire would move in. I saw the engine would twist which would make the front tire to move eradically which probably make it wobble at higher speed. Was wondering if any one heard of that. It seems as if the transaxle mount is bad, which is on the driverside. Would make sense.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 21, 2012, 6:46 PM
Post #11 of 13
(2453 views)
|
|
Re: Engine mounts?
|
Sign In
|
|
No, that would have to be the entire subframe shifting for that to happen. It would cause the suspension to shift but still not a pulsation when braking.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
hdtramp
New User
May 21, 2012, 6:51 PM
Post #12 of 13
(2450 views)
|
|
Re: Engine mounts?
|
Sign In
|
|
When I step on it the engine doesn't twist, only when the wheels are turning and I hit the brakes.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 21, 2012, 7:23 PM
Post #13 of 13
(2440 views)
|
|
Re: Engine mounts?
|
Sign In
|
|
That would be expected if the subframe is loose as the brake pulls the wheel back.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
